Brother HL-1870N User Guide

CHAPTER 10 BANYAN VINES NETWORK CONFIGURATION 

10-6

 

 
As an alternative to BRadmin, you may use the print server console to configure 
the print server. The steps are as follows: 
 

1.  Connect to the print server console using TELNET, NCP, BRCONFIG 

Execute some or all of the commands detailed below (you must 
minimally enter the StreetTalk login name of the print server and 
associate one of the print server services with the StreetTalk name of a 
print queue).  

 
SET BAnyan LOgin loginname 
Sets StreetTalk login name of print server. 
 
SET BAnyan PAssword password 
Sets login password of print server. The password (if any) must match the 
password you specified in step A-3. 
 
SET SERVIce service STreettalk queuename 
Enables the Banyan protocol on the specified Brother print server service and 
associates this service with the StreetTalk name of a given print queue on the 
VINES file server. Type SHOW SERVICE to see a list of the available services 
(if in doubt, use BINARY_P1). 
 
SET BAnyan HOp nn 
Sets number of hops between the Brother print server and the Banyan file server. 
The default value is 2, which is adequate for most sites, but you will need to 
change this value if the file server is more than two hops away from the print 
server. 
When you have finished entering commands, type EXIT to exit the remote 
console and cause the commands to take effect.