Brother HL-1870N User Guide

CHAPTER 12 TCP/IP CONFIGURATION 

12-3

 

 
If your PC has Novell Netware Client software and is using the IPX/SPX 
protocol, do the following: 
 

1.  Select IPX/SPX filter in the left frame of the main window. 
2.  Check the print server name (the default node name will be 

BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet 
address (MAC address)) . 

 
If you cannot find your server name, select the "Device" menu and choose 
"Search Active Devices" (you can also press the F4 key) and try again. 
 
You can find the node name and MAC address by printing out the printer 
configuration page. Refer to the User’s Guide for information on how to print the 
configuration page on your print server. 
 

3.  Select the print server that you wish to configure and double click it. 

You will be asked for a password. The default password is "access". 

4.  Select the TCP/IP tab and set the IP address, Subnet mask and Gateway 

as needed. 

5. Click 

OK.