Brother HL-1870N User Guide

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION 

5-3

 

 
The print server can be configured using BRAdmin, by using a web browser, or 
by using the TELNET command.  

 

 
Before configuring the print server to receive BIP jobs, be sure that the E-mail 
server at the remote site (the receiving end) is configured to handle the TCP/IP 
POP3, and SMTP protocols (SMTP is only required if the notification feature is 
enabled). 
 

1.  Configure the POP3 server on the E-mail server at the remote site with a 

mail account (Mailbox name) and password for the Brother print server 
(generally, the mail account name will be the first part of the Email 
address; for example, if you assign the Email address 
emailprinter@xyz.com, then the mail account name would be 
emailprinter).  

 
2.  Make sure that the print server is installed and running with TCP/IP 

enabled and has a valid IP address assigned to it. 

 
Because access to the E-mail server on most networks is usually restricted, you 
may need to have your network administrator check the configuration and add 
the mail account.