Zebra 01219-901 User Manual
03/03/2009
TTP 1020™/TTP 1030™ Technical Manual
P1003643-001
10
Firmware
The firmware is stored in flash-PROM on the control board. A replacement control board just
contains a bootstrap program that is used to communicate through the parallel interface to
make it possible to load the firmware.
contains a bootstrap program that is used to communicate through the parallel interface to
make it possible to load the firmware.
Loading
Load the firmware from the Zebra web site
http://www.zebra.com
. There you will also find a
loader program (Windows™ software) facilitating the loading of the firmware into the printer.
The loader program contains a help file with detailed instructions on how to load the firmware
into the printer.
into the printer.
In non-Windows environments, use the following procedure to load the firmware:
1.
Send ESC NUL (1BH 00H) to the printer.
2.
Wait 0.5 seconds.
3.
Send the HEX firmware file to the printer.
4.
Wait until the printer buzzes to confirm that the loading is complete (the presenter motor
runs for a second).
runs for a second).