Zebra 01219-901 User Manual
Installation
Connecting to the Computer
Connecting to the Computer
14
P1003643-001
TTP 1020™/TTP 1030™ Technical Manual
03/03/2009
Connecting to the Computer
TTP 1020
Connect the printer to the parallel port of the computer to be used.
Connector J7 is an IEEE-1284 type C, 36-pole mini Centronics, with clip latches. See
.
Use only certified cables marked IEEE-1284. See
for Zebra
ordering number. You can also use commercially available cables such as AMP 158393-3.
Figure 3 • IEEE-1284 cable with type A and type C connectors
TTP 1030
Using the USB Interface
Connect the printer to the USB port of the computer, or the USB hub to be used. USB
connectors can be recognized by the following symbol: .
connectors can be recognized by the following symbol: .
Connector J7 is a 4-pin USB type B connector. See
for pin assignment.
Caution •
Using a non-approved cable with the printer may void the FCC and other EMC
approvals of the printer.