Brother Innov-is XV8500D Operating Guide
SEWING THE STITCHES
158
a
Select
or .
b
Use
in either the stitch width
display or the stitch length display to
choose the size of the eyelet.
choose the size of the eyelet.
*
Actual size
a Large 7 mm (approx. 1/4 inch)
b Medium 6 mm (approx. 15/64 inch)
c Small 5 mm (approx. 3/16 inch)
c Small 5 mm (approx. 3/16 inch)
c
Attach monogramming foot “N”, then
rotate the handwheel toward you
(counterclockwise) to check the needle
drop position.
rotate the handwheel toward you
(counterclockwise) to check the needle
drop position.
a Needle drop position
d
Lower the presser foot and start sewing.
→ When sewing is finished, the machine sews
reinforcement stitches and stops automatically.
e
Use the eyelet punch to make a hole in the
center of the stitching.
center of the stitching.
Multi-directional Sewing
(Straight Stitch and Zigzag Stitch)
(Straight Stitch and Zigzag Stitch)
Use these stitch patterns to attach patches or
emblems to pant legs, shirt sleeves, etc.
emblems to pant legs, shirt sleeves, etc.
a
Remove the flat bed attachment to use the
free-arm.
free-arm.
b
Select
and attach monogramming foot
“N”.
Note
• Only one size is available for
.
Note
• If the stitch pattern comes out poorly, make
adjustments to “SEWING STITCH
PATTERNS” on page 175.
PATTERNS” on page 175.
Memo
• Insert the tubular piece of fabric onto the
free-arm, and then sew in the order shown
in the illustration.
in the illustration.
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of
this manual.
this manual.