Brother NX-250 Operating Guide

Turning the Machine On/Off 15

Turning on the machine

Make sure that the sewing machine is turned
off (the main power switch is set to “O”), and
then plug the power cord into the power
supply jack on the right side of the machine.

Insert the plug of the power cord into a
household electrical outlet.

1 Power supply jack

Press the right side of the main power switch
on the right side of the machine (set it to “|”).

The sewing lamp comes on when the
machine is turned on.

Memo

● When the machine is turned on, the needle

and the feed dogs will make sound when
they move; this is not a malfunction.

Turning off the machine

When you are finished using the sewing machine,
turn it off. In addition, before transporting the sewing
machine to another location, be sure to turn it off.

Make sure that the machine is not sewing.

Press the left side of the main power switch on
the right side of the machine (set it to “{”).

The sewing lamp goes off when the
machine is turned off.

Unplug the power cord from the electrical
outlet.
Grasp the plug when unplugging the power
cord.

Unplug the power cord from the power
supply jack.

Note

● If a power outage occurs while the sewing

machine is being operated, turn off the
sewing machine and unplug the power
cord. When restarting the sewing machine,
follow the necessary procedure to correctly
operate the machine.
(For U.S.A. only)

● This appliance has a polarized plug (one

blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.