Brother NX-250 Operating Guide
Replacing the Presser Foot 33
1
Replacing the Presser Foot
The presser foot presses down on the fabric.
Presser foot precautions
Be sure to observe the following precautions concerning the presser feet.
Replacing the presser foot
Replace the presser foot as described below.
1
Press
(“Needle Position” button) once
or twice to raise the needle.
1 “Needle Position” button
X
The needle is raised.
2
Turn off the sewing machine.
3
Raise the presser foot lever.
1 Presser foot lever
X
The presser foot is raised.
4
Press the black button at the back of the
presser foot holder.
presser foot holder.
1 Black button
2 Presser foot holder
2 Presser foot holder
X
The presser foot holder releases the presser
foot.
foot.
●
Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the needle to bend or break.
needle may hit the presser foot, causing the needle to bend or break.
●
Only use presser feet designed specifically for this sewing machine. Use of any other presser
foot may result in injuries or damage to the machine.
foot may result in injuries or damage to the machine.
CAUTION
1
●
Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
to turn off the sewing machine, otherwise
injuries may occur if
(“Start/Stop”
button) is accidentally pressed and the
machine starts sewing.
machine starts sewing.
CAUTION
a
a
b