Brother NX-250 Operating Guide
54
SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Sewing hook-and-loop
fastener
fastener
Note
● Before start sewing, baste together the fabric
and the hook-and-loop fastener.
Make sure that the needle passes through the hook-
and-loop fastener by turning the handwheel and
lower the needle into the hook-and-loop fastener
before sewing. And then, sew the edge of the hook-
and-loop fastener at a slow speed.
If the needle does not pass through the hook-and-
loop fastener, replace the needle with the needle for
thick fabrics (page 30).
and-loop fastener by turning the handwheel and
lower the needle into the hook-and-loop fastener
before sewing. And then, sew the edge of the hook-
and-loop fastener at a slow speed.
If the needle does not pass through the hook-and-
loop fastener, replace the needle with the needle for
thick fabrics (page 30).
1 Edge of the hook-and-loop fastener
●
Use only the ungummed hook-and-loop
fastener which is for sewing. If the glue is
attached to the needle or the bobbin
hook race, it may cause malfunction.
fastener which is for sewing. If the glue is
attached to the needle or the bobbin
hook race, it may cause malfunction.
●
If the hook-and-loop fastener is sewn
with the thin needle (65/9-75/11), the
needle may bend or break.
with the thin needle (65/9-75/11), the
needle may bend or break.
CAUTION