Brother NX-250 Operating Guide
Zipper Insertion 75
3
0
Close the zipper, turn over the fabric, and then
baste the other side of the zipper to the fabric.
baste the other side of the zipper to the fabric.
1 Basting stitching
a
Attach the presser foot holder to the other pin
of zipper foot “I”.
If the presser foot holder was attached to the
right pin in step
of zipper foot “I”.
If the presser foot holder was attached to the
right pin in step
6
, change it to the left pin.
1 Pin on the left side
2 Needle drop point
2 Needle drop point
b
Topstitch around the zipper.
Sew reverse stitches at the end of the zipper
opening and align the zipper teeth with the
side of the presser foot.
Sew reverse stitches at the end of the zipper
opening and align the zipper teeth with the
side of the presser foot.
1 Right side of fabric
2 End of zipper opening
3 Reverse stitches
4 Beginning of stitching
5 Basting stitching
2 End of zipper opening
3 Reverse stitches
4 Beginning of stitching
5 Basting stitching
c
When you are about 5 cm (2 inches) from the
end of the zipper, stop the sewing machine
with the needle lowered (in the fabric), raise
the presser foot lever, and then open the
zipper and continue sewing.
end of the zipper, stop the sewing machine
with the needle lowered (in the fabric), raise
the presser foot lever, and then open the
zipper and continue sewing.
d
Remove the basting stitching.
●
When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
does not touch the zipper, otherwise the
needle may bend or break.
1
I
2
1
1
2
3
4
5
CAUTION