Brother PR-620/620C/600II/600IIC User Guide

 3

● Do not place floppy disks or magnetic cards 

near the cylinder frame driver. The cylinder 
frame driver is equipped with extremely 
strong magnets, which may affect magnetic 
media.

● Before installing the cylinder frame driver, 

verify the version of your machine by 
checking the shape of the notch in the 
connecting plate installed on the carriage.

● If the notch is not split in three, the 

embroidery machine is the older version. 
Purchase the upgrade kit (sold separately) 
and upgrade the embroidery machine. For 
details, contact your authorized retailer.

● Before installing the cylinder frame, be sure 

to adjust the cylinder frame driver. If the 
same machine is being used, this 
adjustment is only required the first time 
that it is used. For details, refer to “Adjusting 
the cylinder frame driver (only when used 
for the first time)” on page 7.

● After the cylinder frame driver has been 

adjusted, it must be adjusted again if a 
different machine is being used. Adjust the 
driver for each machine that is used. For 
details, contact your authorized retailer.

● When the cylinder frame is attached, the 

following embroidery frame indicator 
(indicator showing the embroidery frames 
that can be used) appears.

By using the cylinder frame, patterns can be 
embroidered onto bags and cylindrical items. The 
procedures for using the cylinder frame are 
described below.

1

Only this area can be embroidered.

● There are various conditions on the size and 

fabric in order to embroider. For details on 
these conditions, refer to page 4 through 5.

● When embroidering golf club covers, check 

that the fabric is elastic and is a size that fits 
in the cylinder frame. In addition, only one-
point embroidery patterns can be sewn in 
the area indicated in the illustration.

a