Brother HS-2500 Operating Guide
79
4
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
g
Insert the bobbin case so that the U mark on
the bobbin case aligns with the { mark on the
race.
the bobbin case aligns with the { mark on the
race.
• Align the U and { marks.
a
U mark
b
{ mark
c Bobbin case
• Make sure that the indicated points are
aligned before installing the bobbin case.
h
As shown, insert the tab on the needle plate
cover into the hole in the needle plate, and
then correctly position of the needle plate
cover.
cover into the hole in the needle plate, and
then correctly position of the needle plate
cover.
a Needle plate cover
b Tab
c Hole
b Tab
c Hole
• Check that the needle plate cover is flush
with the top surface of the machine.
● Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XE7560-001), contact your
nearest authorized service center.
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XE7560-001), contact your
nearest authorized service center.
● Make sure that you fit the bobbin case
properly, otherwise the needle may break.
CAUTION