Brother PE-DESIGN NEXT Instruction Manual
146
Tutorial 7: Print and Stitch
Step 4
Embroidering
If an iron-on transfer sheet is used, transfer
the image onto fabric.
the image onto fabric.
Hoop the fabric in the embroidery frame.
Place the positioning sheet on the fabric to be
embroidered so that it is aligned with the
printed image.
embroidered so that it is aligned with the
printed image.
• If the positioning sheet is too large, cut it to
an appropriate size so it can easily be used
for aligning the positions.
for aligning the positions.
• Tape the positioning sheet to the fabric to
secure it in place.
Attach the embroidery frame to the
embroidery machine.
embroidery machine.
Be sure that the positioning sheet does not
move out of place.
move out of place.
Align the needle with the mark at the center of
the positioning sheet.
the positioning sheet.
• If the embroidery machine has a built-in
camera, press the start positioning button
to detect the positioning mark and
automatically align the embroidering
position.
to detect the positioning mark and
automatically align the embroidering
position.
• With other embroidery machines, manually
align the positions.
After positioning is finished, remove the
positioning sheet from the fabric.
positioning sheet from the fabric.
Start the embroidery machine to embroider
the pattern.
the pattern.
b
Memo:
For details on transferring from iron-on
transfer sheets, refer to the instructions for the
iron-on transfer sheets.
transfer sheets, refer to the instructions for the
iron-on transfer sheets.
1
2
3
4
b
Memo:
• For details on using the embroidery
machine, refer to the Operation Manual
included with the machine.
included with the machine.
• Six patterns of completed samples for Print
and Stitch are provided in the following
folder.
Documents (My Documents)\
PE-DESIGN NEXT\Sample\Layout &
Editing\Print and Stitch
folder.
Documents (My Documents)\
PE-DESIGN NEXT\Sample\Layout &
Editing\Print and Stitch
5
6
7
XE8656-001.book Page 146 Monday, May 24, 2010 5:44 PM