Brother PE-DESIGN NEXT Instruction Manual
217
Desi
gn
Dat
Dat
a
ba
se
se
Transferring Embroidery Designs to Machines
Transferring Embroidery Designs to
Machines
Machines
Transferring to a machine
by using an original card/
USB media/USB cable
by using an original card/
USB media/USB cable
1.
Prepare the media to be used to make the
transfer, or connect an embroidery machine to
the computer.
transfer, or connect an embroidery machine to
the computer.
2.
Click .
a
Note:
The procedures for transferring the created embroidery design to an embroidery machine differ depending
on your embroidery machine model. For detail, refer to the Operation Manual provided with your
embroidery machine.
on your embroidery machine model. For detail, refer to the Operation Manual provided with your
embroidery machine.
a
Note:
Be sure that the hoop size of the design does
not exceed the hoop that will be used on the
embroidering machine.
not exceed the hoop that will be used on the
embroidering machine.
b
Memo:
• If the design is to be written to an original
card, insert the original card into the USB
card writer module.
card writer module.
• If the design is to be written to USB media,
plug the USB media into the computer.
• If the design is to be transferred directly to
an embroidery machine, connect the
embroidery machine to the computer. For
details on transferring design, refer to the
Operation Manual provided with your
embroidery machine.
embroidery machine to the computer. For
details on transferring design, refer to the
Operation Manual provided with your
embroidery machine.
• In order to use the Link function to transfer
embroidery designs, an embroidery
machine compatible with the Link function
must be running in Link mode.
machine compatible with the Link function
must be running in Link mode.
c
“Using the Link Function to
Embroider From the Computer”
on page 177
Embroider From the Computer”
on page 177
Contents pane
(Available designs)
Writing list
(Selected designs)
XE8656-001.book Page 217 Monday, May 24, 2010 5:44 PM