Brother PE-DESIGN NEXT Instruction Manual

83

Print template grid:

Select this check box to print green 
lines to represent the grid printed on 
the embroidery sheet included with the 
hoop. (This setting cannot be selected 
if User Hoop, Cap Frame, Cylinder 
Frame, Jumbo Frame or Round 
Frame has been selected as the 
Design Page size.)

Print hoop section boundaries onto 
the first page:

Select this check box to print the 
sections of a design where the Design 
Page has been set to a custom size or 
to Jumbo Frame. The pattern sections 
are printed in red.

Divide embroidery image into 2 pages:

Select this check box to print at actual 
size and on A4- or Letter-size paper a 
design that is larger than the paper size 
by dividing it in two and printing each 
half on different pages.
(This setting is only available when 
Actual size is selected in the Print 
Setup dialog box and when the Design 
Page is set to the larger hoop sizes. 
This setting is not available if a User 
Hoop size is selected.)

With this split printing feature, 

 / 

 

or 

 / 

 is printed in the lower-right 

corner of the paper to indicate which 
half is printed.

(6) Stitch image 

Normal:

Select this option to print the design as 
lines and dots.

Realistic:

Select this option to print a realistic 
image of the design. To change the 
settings of the realistic image, click 
Attributes.

c

(7) When printing an imported image onto 

iron-on paper or printable fabric, or when 
printing the sheet for positioning the 
embroidery in the printed image, select 
Image print mode, and then select an 
option under Material.

(8) Material 

Print the image on printable fabric or 
an iron-on transfer sheet:

Select this option to print the 
background image on iron-on paper or 
fabric that can be printed on. Only the 
image is printed.

Print a flipped image:

Select this check box to print the image 
flipped on a vertical axis. When printing 
on iron-on paper, the image is normally 
printed flipped (mirror image). (For 
details, refer to the instructions for the 
iron-on paper that you are using.)
Select this option if your printer does 
not have a function for printing a flipped 
(mirror) image. (For details, refer to the 
instructions for your printer.)

Print a sheet of paper for aligning the 
printed image and the embroidery:

Select this option to print a sheet for 
aligning the positions of the image and 
embroidery. Positioning marks and 
guide lines indicating the embroidering 
area are printed on the image.

(9) Change Position:

The position where the image is printed 
on the paper can be changed. (Any part of 
the image extending out of the print area 
of the paper is not printed.) Click Change 
Position to display the Image Print 
Position Setting dialog box, and then 
drag the image to the desired printing 
position in the paper.

a

XE8656-001.book  Page 83  Monday, May 24, 2010  5:44 PM