Topfield TF7750HDPVR 910-1040 User Manual
Product codes
910-1040
6
Introduction
30
is used to jump back to the beginning of the recording
on playback.
31
is used to jump to the end of the recording on playback.
32
F1
has different functions per menu.
33
F2
is used to make a bookmark on playback or time-shift.
34
F3
is used to jump to next bookmark position.
35
F4
has different functions per menu.
36
has different functions per menu.
37
M
is not used in this model.
NOTE
When using the remote control, point it at the remote sensor
on the front panel of the digital receiver.
on the front panel of the digital receiver.
1.3
Common Interface
There are pay TV services available; these
are accessible with the use of a Conditional
Access Module (CAM) and a subscription
card. A Common Interface (CI) is the slot
into which you can insert a CAM. The front
of the digital receiver has two common inter-
face slots. To watch a pay service, you should
take the following steps:
are accessible with the use of a Conditional
Access Module (CAM) and a subscription
card. A Common Interface (CI) is the slot
into which you can insert a CAM. The front
of the digital receiver has two common inter-
face slots. To watch a pay service, you should
take the following steps:
1. Purchase a CAM and a subscription card for the pay ser-
vice you want to watch.
2. Insert the subscription card into the CAM.
3. Insert the CAM into a common interface on the front of
the digital receiver.