Topfield TF7750HDPVR 910-1040 User Manual
Product codes
910-1040
9
9.3 From your computer via RS-232 port
81
Select the
Installation > LAN
Setting > IP Configuration menu.
You should see a screen like the
left figure.
You should see a screen like the
left figure.
You may get the digital receiver
to be assigned a dynamic IP ad-
dress. Set the DHCP option to
On to do that.
to be assigned a dynamic IP ad-
dress. Set the DHCP option to
On to do that.
If you desire to use static IP address, set the DHCP option to
Off, then the IP Address, Subnet Mask and Gateway options
become enabled. You have to set these options to match with
the configuration of your router.
Off, then the IP Address, Subnet Mask and Gateway options
become enabled. You have to set these options to match with
the configuration of your router.
To enable the digital receiver to update the firmware auto-
matically when a new firmware is available, set the Auto LAN
Firmware Upgrade option to On.
matically when a new firmware is available, set the Auto LAN
Firmware Upgrade option to On.
Otherwise if you want to do that by yourself, select the Instal-
lation > Firmware Update via Network menu, then you will be
asked for confirmation. If you select Yes, it checks up whether
a new firmware is available, and if any, it will start firmware
update.
lation > Firmware Update via Network menu, then you will be
asked for confirmation. If you select Yes, it checks up whether
a new firmware is available, and if any, it will start firmware
update.
9.3
From your computer via RS-232 port
It is possible to transfer a new firmware to the digital receiver
from your computer by connecting them with an RS-232 cable.
You need TFD-Down, a firmware transfer utility for this, which
is available from the website,
from your computer by connecting them with an RS-232 cable.
You need TFD-Down, a firmware transfer utility for this, which
is available from the website,
.
To update the firmware by this method, take the following
steps:
steps: