Brother CM550DX/ CM550 Leaflet
Englis
h
Appliqué embroidery data (.pes or .phc files) containing cutting lines can be imported into a cutting machine,
which can cut out the fabric for an appliqué piece. .phc files are embroidery data from sewing machines
equipped with an appliqué embroidering function, and .pes files are embroidery data created with the
embroidery design software system “PE-DESIGN”.
which can cut out the fabric for an appliqué piece. .phc files are embroidery data from sewing machines
equipped with an appliqué embroidering function, and .pes files are embroidery data created with the
embroidery design software system “PE-DESIGN”.
Note
•
For details on .pes and .phc files, contact your
authorized Brother dealer or the nearest Brother
authorized service center.
authorized Brother dealer or the nearest Brother
authorized service center.
Saving .pes or .phc Files to a USB
Flash Drive
Flash Drive
■ Saving .phc Files
Using a sewing machine that can save embroidery
patterns to an external device, save an embroidery
pattern with an “APPLIQUE MATERIAL
patterns to an external device, save an embroidery
pattern with an “APPLIQUE MATERIAL
”
pattern to the USB flash drive. The procedure for saving
the embroidery pattern to the USB flash drive differs
depending on the sewing machine. Refer to the
operation manual for your sewing machine.
the embroidery pattern to the USB flash drive differs
depending on the sewing machine. Refer to the
operation manual for your sewing machine.
■ Saving .pes Files
Using the embroidery design software system
PE-DESIGN, save an embroidery pattern with an
PE-DESIGN, save an embroidery pattern with an
“APPLIQUE MATERIAL
” pattern to the USB flash
drive. The procedure for saving the embroidery pattern
to the USB flash drive differs depending on the version
of the software. Refer to the Instruction Manual for your
software.
to the USB flash drive differs depending on the version
of the software. Refer to the Instruction Manual for your
software.
Recalling the Pattern to the Cutting
Machine and Cutting the Fabric
Machine and Cutting the Fabric
a
Plug the USB flash drive containing the
embroidery pattern (.pes or .phc file) into the
USB port on the cutting machine, and then
recall the pattern.
embroidery pattern (.pes or .phc file) into the
USB port on the cutting machine, and then
recall the pattern.
X
“APPLIQUE MATERIAL” appears in the screen.
Memo
• If the pattern does not appear in the screen
when it has been imported, even if it is a .pes or
.phc file, the data cannot be cut. Check the file
whether it includes “APPLIQUE MATERIAL”
and it was originally created in the PE-DESIGN
software or appliqué embroidery function.
.phc file, the data cannot be cut. Check the file
whether it includes “APPLIQUE MATERIAL”
and it was originally created in the PE-DESIGN
software or appliqué embroidery function.
b
Attach the fabric for the appliqué piece to the
mat, and then cut out the pattern.
mat, and then cut out the pattern.
c
Refer to the operation manual for the sewing
machine to complete the appliqué.
machine to complete the appliqué.
Cutting an Appliqué Piece