Elac FS 207 A 31398 Leaflet

To celebrate ELAC’s 80th anniversary, we now 
introduce the FS 207 in a new design. The loudspeaker 

looks not only impressive, it’s  ELAC's state-of-the-art 

technology for the best possible value for money!  

 
Technical features/benefits: 

•  Powerful-driven new JET-III tweeter with 

neodymium magnet system. Due to its ribbon 

geometry, it provides a cut-off frequency of 50 

kHz (!) and improved sound radiation. The inner 
damping enables perfect linear frequency 

response. 

•  Innovative 150 mm concave high-power 

aluminium woofer with broad rubber surround. 

With a special glueing procedure,  a 0.2 mm 

aluminium layer is bonded to a pulp fibre cone 

to form a sandwich diaphragm. Perfect tension 
of the diaphragm, resulting in perfect large-

signal behaviour; dampening on the back of the 

diaphragm for strong bass  

•  computer-optimized cross-over network for 

improved sound power to provide for optimum 

and homogenous directional characteristic 

regarding the frequency range  

•  all drivers are protected from overload 

 
 

 

 

 
 

 

 

 

•  MDF cabinet design (medium density fibre board, density: 800 kg/m

3) 

with additional reinforcements for minimum resonances.  

•  Another feature is ELAC’s superior bi-wiring terminal with separate 

circuit boards for bass and treble circuits. The inclined binding posts are 

easy to access and allow larger cable diameters (16 qmm), as well as 
high-quality spade ends (e. g. WBT products).  

•  The FS 207 A is available with plinth and new ELAC spikes/   silicone 

feet  

 

 

Finishes: matt black, cherry veneer, silver shadow, titan shadow, white high gloss, black high gloss 
 
 

Crossover frequency  

350/2700 Hz 

Dimensions HxBxT 

935 x 170 x 285 mm 

Nominal / Peak Power Handling  

120 W / 160 W 

Weight 

approx. 15 kg  

Frequency range  

36-50.000 Hz 

Type 

2,5-way, bass reflex 

Sensitivity  

89 dB/2.8V/m 

Woofer 

2 x 150 mm cone, magnetically 
shielded 

Nominal impedance  

4 Ohms 

Tweeter 

1 x JET III  

Minimum impedance  

3.4 Ohms at 220 Hz 

Recom. Amplifier Power at 
Nominal Impedance 

30 – 250 W / channel