Brother RJ-3150 Reference Guide
Raster Command Reference
- 11 -
4. Print Data
Descriptions for the numbers in the print data on the previous page are provided in the following table.
For details on each command, refer to “
”.
No.
Command Name
Description
1
Invalidate
A 350-byte invalidate command is sent.
(With the RJ-2000, a 200-byte invalidate command is sent.)
(With the RJ-2000, a 200-byte invalidate command is sent.)
2
Initialize
The “initialize” command is sent.
3
Switch dynamic
command mode
command mode
The printer is switched to raster mode.
Send this command before sending raster data to the printer.
Send this command before sending raster data to the printer.
4
Job ID setting
commands
commands
Internal specification commands.
Since this is a command for outputting with the commercial
version of the driver, it is unnecessary for the user to send this
command.
Since this is a command for outputting with the commercial
version of the driver, it is unnecessary for the user to send this
command.
5
Additional media
information command
information command
Additional media information on the media size is sent.
This is the command for “3.15" (80 mm)”.
This is the command for “3.15" (80 mm)”.
6
Print information
command
command
Media size information for the print data is sent.
This is the command for “3.15" (80 mm)” continuous length tape.
This is the command for “3.15" (80 mm)” continuous length tape.
7
Various mode settings
(1Bh+69h+4Dh+00H)
This is the command for specifying settings such as cut options.
Since there are no cut options with this model, it is unnecessary
to send this command.
Since there are no cut options with this model, it is unnecessary
to send this command.
8
Specify margin amount
This is the command for specifying the amount of the margins.
This indicates margins of “3 mm (24 dots)”.
This indicates margins of “3 mm (24 dots)”.
9
Select compression
mode
mode
TIFF compression mode is selected.
10
Raster data
Raster data continues.
11
Print command with
feeding
feeding
Since one page will be printed, this is sent at the end of the first
page.
page.