Brother CM350R Operating Guide
50
Patterns and characters arranged in the cutting/
drawing area can be saved and recalled later.
drawing area can be saved and recalled later.
Note
•
USB flash drive is widely used, however some
USB flash drive may not be usable with this
machine. Please visit our website
“ http://support.brother.com ” for more details.
USB flash drive may not be usable with this
machine. Please visit our website
“ http://support.brother.com ” for more details.
Saving
Available in the following screen
a
Touch the “Save” key to display the destination
memory selection screen.
memory selection screen.
b
Touch the desired destination to start saving.
a Save to the machine’s memory.
X
When saving is finished, the following message
and the name of the saved file appear.
and the name of the saved file appear.
b Save to the USB flash drive.
• In order to save data on a USB flash drive, plug
• In order to save data on a USB flash drive, plug
the USB flash drive into the USB port (for a USB
flash drive) on this machine.
flash drive) on this machine.
X
When saving is finished, the following message
and the name of the saved file appear.
and the name of the saved file appear.
• The name of the saved file with the extension
“.fcm” is automatically assigned.
c Save to the computer.
• In order to save data to connect the computer
• In order to save data to connect the computer
by plugging a USB cable into this machine's
USB port (for computer). For details, see
“Saving Patterns in the Computer” on page 51.
USB port (for computer). For details, see
“Saving Patterns in the Computer” on page 51.
d Save to ScanNCutCanvas. (Wireless network
models only)
• In order to save to ScanNCutCanvas, the
machine must be connected to a wireless
network. This is available only after a
connection has been established with
ScanNCutCanvas (http://
ScanNCutCanvas.Brother.com/). For details on
making the connection, refer to “Wireless
Network Setup Guide”.
network. This is available only after a
connection has been established with
ScanNCutCanvas (http://
ScanNCutCanvas.Brother.com/). For details on
making the connection, refer to “Wireless
Network Setup Guide”.
X
When saving is finished, the following message
and the name of the project appear. For details on
checking data saved in ScanNCutCanvas, refer to
“Wireless Network Quick Setup Guide”.
and the name of the project appear. For details on
checking data saved in ScanNCutCanvas, refer to
“Wireless Network Quick Setup Guide”.
• This is a function of ScanNCut Online. For
details, refer to “Overview of “ScanNCut
Online” for Data Transfer via a Wireless
Network” on page 11.
Online” for Data Transfer via a Wireless
Network” on page 11.
• If
in the pattern category selection screen is
blue, the machine is connected to a wireless
network.
network.
Note
• While data is being saved, do not remove the
USB flash drive or disconnect the USB cable.
c
Touch the “OK” key to finish saving the data.
X
The destination memory selection screen appears
again.
again.
MEMORY FUNCTIONS
Pattern layout screen
a
d
b
c