Miele DA 3486 Product Manual
Installation
37
Align the casing and screw the
retaining bracket onto the casing.
Secure the spacer strip to the back of
the appliance from behind using 4
plastic rivets as shown.
plastic rivets as shown.
Attaching the front panel
The front of the fume deflector can be
fitted with a front panel to match
existing cabinetry.
The front panel must not exceed
approx. 2.8 lbs. (1300 g). This applies to
front panels with a depth of up to
approx. 1" (30 mm). For larger and
heavier front panels, the weight must be
reduced.
fitted with a front panel to match
existing cabinetry.
The front panel must not exceed
approx. 2.8 lbs. (1300 g). This applies to
front panels with a depth of up to
approx. 1" (30 mm). For larger and
heavier front panels, the weight must be
reduced.
A DML 400 installation kit, available as
an optional accessory, is required for
fitting a front panel.
an optional accessory, is required for
fitting a front panel.
Follow the installation instructions
supplied.