Samsung UD46C User Manual

106

1 

Go to the 

 screen. Select 

, press 

, and then press 

 again.

2 

The network test screen appears and the verification process starts. Press 

. The verification 

process stops.

3 

Select 

 on network connection screen. The 

 screen appears.

4 

Select the field at the top, press 

, and then set 

 to 

. Repeat the 

entry process for each field in the 

.

 

― Setting 

 to 

 automatically changes 

 to 

.

5 

When done, select 

 at the bottom of the page, and then press 

. The network test screen 

appears and the verification process starts. 

6 

When the connection has been verified, the “

” message appears.

To connect your product to your network wireless, you need a wireless router or modem and a 
Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back 
or side panel USB port. See the illustration below.

The LAN Port on the Wall

Wireless IP sharer

(router having DHCP server)

LAN Cable

Product Panel

Samsung Wireles LAN Adapter

Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce 
sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n 
communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a 
network connection, the video may not play smoothly.

 

― You must use the “Samsung Wireless LAN adapter” (WIS10ABGN, WIS12ABGNX) to use a wireless 

network.
The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered 
by select retailers, Ecommerce sites, and Samsungparts.com.

 

― Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the 

wireless IP sharer is currently being used by another device nearby, this will result in interference 
and communication failure.

 

― Your product supports only the following wireless network security protocols.

If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set 
to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not 
support a connection in compliance with new Wi-Fi certification specifications.

 

― If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via 

PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically 
configure the SSID and WPA key in either mode.

 

― If your router, modem, or device is not certified, it may not connect to the product via the “Samsung 

Wireless LAN adapter”.

 

― Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”.

 

― Connection Methods: You can setup the wireless network connection in three ways.

Auto Setup (Using the Auto Network Search function), Manual Setup,