Samsung FSR-14 User Manual

English - 25

SETTING

HOW TO ADJUST THE

REFRIGERATOR DOOR GAP

(BACK)

If the gap between the refrigerator door and the

refrigerator is uneven:

• Use the adjustors located at the top edge inside

each door.

1. Open the door where the gap with the

refrigerator is narrower and then turn the

adjustor in the counterclockwise direction

(

) until the gap is even.

Adjustor

2. Once the gap between the door and the

refrigerator has been adjusted, turn the adjustor

nut in the clockwise direction (

) to lock the

adjustor in place.

Locking Nut

CHECKING THE WATER

DISPENSER LINE

A water dispenser is one of the helpful features on

your new Samsung Refrigerator.

To help promote better health, the Samsung water

filter removes unwanted particles from your water.

However, it does not sterilize or destroy

microorganisms.

You may need to purchase a water purifying

system to do that.

In order for the ice maker to operate properly,

a water pressure of 20~125 psi (138~862 kPa)

(pound per square inch) is required.

Under normal conditions, a 170 cc (5.75 oz.) paper

cup can be filled in 10 seconds.

If the Refrigerator is installed in an area with low

water pressure (below 20 psi), you can install a

booster pump to compensate for the low pressure.

Make sure the water storage tank inside the

Refrigerator is properly filled.

To do this, press the water dispenser lever until the

water runs from the water outlet.

Water line installation kits are available at

extra cost from your dealer.

We recommend using a water supply kit

that contains copper tubing.

The new hose-sets supplied with the

appliance are to be used and that old

hose-sets should not be reused.

Check the accessory list.

DA68-02976R-00.indb 25

2016. 8. 1. �� 10:51