Samsung FSR-14 User Manual

English - 26

Connecting to the water supply line

1.  First, shut off the main water supply line.

2.  Locate the nearest cold, drinking water line.

3.  Follow the Water Line Installation Instructions in 

the installation kit.

The water line must be connected to the 

cold water pipe. 

If it is connected to the hot water pipe, it 

may cause the purifier to malfunction.

Close Main 

Water pipe

Close Main 

Water pipe

No gap

4.  After connecting the water supply to the water 

filter, turn your main water supply back on and 

Dispense about 3 L to clear and prime the 

water filter.

Connecting the water line to the 

refrigerator

1.  Remove the cap from water line on the unit and 

insert compression nut to the water line on the 

unit after disassembling from provided water 

line.

2.  Connect both water line from the unit and water 

line in the kit.

3.  Tighten the compression nut onto the 

compression fitting.  

Be careful no gap between two items.

4.  Turn water on and check for any leakage.

No gap

Loosen a

Remove cap

Water Line from Kit

Water Line from unit

Only connect the water line to a drinkable 

water source.

If you have to repair or disassemble the water line, 

cut off 6.5 mm of the plastic tubing to make sure 

you get a snug, leak-free connection.

Before being used, the leakage in these 

places should be examined.

•  Samsung Warranty does not cover WATER 

LINE INSTALLATION.

•  It’ll be done at customer’s charge unless the 

retail price includes installation cost.

•  Please contact Plumber or Authorized Installer 

for the installation if needed.

•  If Water leakage occurs due to improper 

installation, Please contact installer.

DA68-02976R-00.indb   26

2016. 8. 1.   �� 10:51