Samsung FSR-14 User Manual

English - 27

SETTING

 UP

No Leak

1.  Slip the compression nut ( A ) through the 

supplied plastic tubing ( A ).

2.  Tighten the compression nut ( A ) onto the 1/4” 

compression fitting. 

 

- If you are using copper tubing, slip the 

compression nut ( B ) (not included) and ferrule 

(not included) on copper tubing (not included) 

as shown.

 

- If you are using plastic tubing ( B ), insert the 

molded end (Bulb) of the plastic tubing ( B ) into 

the compression fitting.

Do not use without the molded end(Bulb) 

of the plastic tubing ( B ).

3.  Tighten the compression nut ( B ) onto the 

compression fitting.  

Do not over-tighten the compression nut ( B ).

4.  Turn water on and check for any leakage.

Only connect the water line to a drinkable 

water source. 

If you have to repair or disassemble the 

water line, cut off 1/4“ of the plastic tubing 

to make sure you get a snug, leak-free 

connection.

BEFORE USING ICEMAKER

Remove

 

- Remove the Icemaker Bucket by lifting it up and 

pulling it out slowly.

 

- Grip the handle as shown in the figure.

 

- Remove the Ice Bucket slowly to prevent 

damage.

Figure 1

Do not use excessive force when removing 

the drawer cover. 

Otherwise, the cover may break and cause 

injury.

Before removing any accessories, make 

sure that no food is in the way. 

When possible, remove the food altogether 

to reduce the risk of accidents.

Install

 

- Assemble the icemaker in the reverse order of 

disassembly.

 

- Push the bucket in firmly until you hear a 

clicking sound.

DA68-02976R-00.indb   27

2016. 8. 1.   �� 10:51