Samsung SL-M3065FW User Manual

 

The following instructions may vary from your model or operating systems.

 

Download SetIP program from Samsung web site and extract it.

Double-click the SetIPApplet.html file in cdroot/Linux/noarch/
at_opt/share/utils folder.

Click to open the TCP/IP configuration window.

Enter the machine’s new information into the configuration window. In 
a corporate intranet, you may need to have this information assigned by 
a network manager before proceeding.

 

Find the machine’s MAC address from the Network Configuration Report 
(see "Printing a network configuration report" on page 140) and enter it 
without the colons. For example, 30:CD:A7:41:A2:78 becomes 
0015992951A8.

 

The machine will automatically print the Network Configuration 
Report.

 

IPv6 is supported properly only in Windows Vista or higher.

 

 

•

If the IPv6 network seems to not be working, set all the network setting 
to the factory defaults and try again using Clear Settings.

•

For models that do not have the display screen on the control panel, you 
can set up IPv6 addressing using the SyncThru™ Web Service.

 

Press the 

 (Menu) button on the control panel.

Press Network > TCP/IP (IPv6) > IPv6 Protocol

Select On and press OK.

Turn the machine off and turn it on again.

 

When you install the printer driver, do not configure both IPv4 and 
IPv6. We recommend to configure either IPv4 or IPv6 (see "Installing 
driver over the network" on page 145

).