Samsung SL-M3065FW User Manual

Make sure that the machine is connected to your computer and 
powered on.

Insert the supplied software CD into your CD-ROM drive.

Select the CD-ROM volume that appears on Finder.

Double-click Install Software icon.

Read the license agreement and check installation agreement button.

Click Next.

Select Wireless on the Printer Connection Type.

Click Next.

Select Using a USB cable on the Select the Wireless Setup Method 
screen. Then, click Next.

If the screen dose not appear, go to step 14.

After searching, the window shows the wireless network devices. Select 
the name (SSID) of the access point you want to use and click Next.

 

When you set the wireless configuration manually, click Advanced Setting.

•

Enter the wireless Network Name: Enter the SSID of the access point 
(SSID is case-sensitive).

•

Operation Mode: Select Infrastructure.

•

Authentication: Select an authentication type.

Open System: Authentication is not used, and encryption may or may 
not be used, depending on the need for data security.

Shared Key: Authentication is used. A device that has a proper WEP key 
can access the network.

WPA Personal or WPA2 Personal: Select this option to authenticate the 
print server based on the WPA Pre-Shared Key. This uses a shared secret 
key (generally called Pre Shared Key pass phrase) that is manually 
configured on the access point and each of its clients.

•

Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES)

•

Network Key: Enter the encryption network key value.

•

Confirm Network Key: Confirm the encryption network key value.

•

WEP Key Index: If you are using WEP Encryption, select the appropriate 
WEP Key Index.

The wireless network security window appears when the access point has 
security enabled.

Enter the Network Key of the access point (or router).

 

The window showing the wireless network setting appears. Check the 
settings and click Next.