Samsung RS30GKASL User Manual
![Samsung](https://files.manualsbrain.com/attachments/d2c8096d7455ef27430abd90929788cd334aa0d9/common/fit/150/50/48a08a3a1c58307d54cf32c153d229d06984b46e0de4abbefb9df295a8d8/brand_logo.png)
18_
operating
water fi lter. The color of indicator changes from
red to light off.
red to light off.
A newly installed water fi lter cartridge may
cause water to briefl y spurt from the water
dispenser. This is due to air getting into the
line. It should pose no problem to operation.
cause water to briefl y spurt from the water
dispenser. This is due to air getting into the
line. It should pose no problem to operation.
Removing residual matter inside the
water supply line after installing a
new fi lter
water supply line after installing a
new fi lter
1. Press the Water button, and then push the
Dispenser Lever with a cup or glass.
2. Flush 1 gallon of water through the fi lter, one
cup or glass at a time. (Flush approximately 6
minutes.) This will clean the water supply system
and remove air from the lines.
minutes.) This will clean the water supply system
and remove air from the lines.
- Additional fl ushing may be required in some
households.
3. Open the refrigerator door and make sure there
are no water leaks coming from the water fi lter.
Reverse Osmosis Water Supply
IMPORTANT : The pressure of the water supply
coming out of a reverse osmosis system going to
the water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
coming out of a reverse osmosis system going to
the water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water fi ltration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to be
a minimum of 40 to 60 psi (276 to 414 kPa.)
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to be
a minimum of 40 to 60 psi (276 to 414 kPa.)
If the water pressure to the reverse osmosis system
is less than 40 to 60 psi (276 to 414 kPa):
• Check to see whether the sediment fi lter in the
is less than 40 to 60 psi (276 to 414 kPa):
• Check to see whether the sediment fi lter in the
reverse osmosis system is blocked. Replace the
fi lter if necessary.
fi lter if necessary.
• Allow the storage tank on the reverse osmosis
system to refi ll after heavy usage.
• If your refrigerator has a water fi lter, it may
further reduce the water pressure when used
in conjunction with a reverse osmosis system.
Remove the water fi lter.
in conjunction with a reverse osmosis system.
Remove the water fi lter.
If you have questions about your water pressure, call
a licensed, qualifi ed plumber.
a licensed, qualifi ed plumber.
Ordering replacement fi lters
To order more water fi lter cartridges, contact your
authorized Samsung dealer.
authorized Samsung dealer.
CHANGING THE WATER FILTER
To reduce risk of water damage to your
property DO NOT use generic brands of
water fi lers in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER
FILTERS.
property DO NOT use generic brands of
water fi lers in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER
FILTERS.
SAMSUNG is not legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of a
generic water fi lter.
damage, including, but not limited to property
damage caused by water leakage from the use of a
generic water fi lter.
SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filters.
ONLY WITH SAMSUNG Water Filters.
The “Filter Indicator” light lets you know when it is
time to change your water fi lter cartridge. To give
you preparation time to get a new fi lter, the red light
will come on just before the capacity of the current
fi lter runs out. Changing the fi lter on time provides
you with the freshest, cleanest water from your
fridge.
time to change your water fi lter cartridge. To give
you preparation time to get a new fi lter, the red light
will come on just before the capacity of the current
fi lter runs out. Changing the fi lter on time provides
you with the freshest, cleanest water from your
fridge.
To change the water fi lter, follow these steps:
1. Turn the water fi lter 90˚
counter-clockwise.
2. Pull the water fi lter from
the fi lter housing.
3. Insert new water fi lter
inside the fi lter housing.
4. Turn the new water fi lter
90˚ clockwise.
5. Press the “Alarm/hold 3 sec for Filter Reset”
button (
) for about 3 seconds to reset the
WARNING