Samsung UN55MU6500F e-Manual
- 85 -
Anynet+ (HDMI-CEC) Isn't Working
When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Try this!
Anynet+ does not work.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices
only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to
only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to
Anynet+ (HDMI-CEC)
(
Settings
General
External Device Manager
Anynet+ (HDMI-CEC)
) and see if
Anynet+ (HDMI-CEC)
has been set to
On
.
Anynet+ may not function when some other functions are active, including Channel Search,
Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn
your TV off and on.
Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn
your TV off and on.
I want to start Anynet+.
Move the focus to the Anynet+ device at
Source
, and then press the up directional
button.
Check if the Anynet+ device is properly connected to the TV, and then select
Check if the Anynet+ device is properly connected to the TV, and then select
Anynet+ (HDMI-
CEC)
(
Settings
General
External Device Manager
Anynet+ (HDMI-CEC)
)
menu to see if
Anynet+ (HDMI-CEC)
is set to
On
.
I want to exit Anynet+.
Set
Anynet+ (HDMI-CEC)
(
Settings
General
External Device Manager
Anynet+ (HDMI-CEC)
) to
Off
.
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
You cannot use the remote control when the TV is configuring Anynet+ or switching to a
viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or
has switched to a viewing mode.
viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or
has switched to a viewing mode.
The Anynet+ device won't
play.
play.
You cannot use the play function when
Start Setup
is in progress.
The connected device is
not displayed.
not displayed.
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to
Check whether the HDMI cable is properly connected.
Go to
Anynet+ (HDMI-CEC)
(
Settings
General
External Device Manager
Anynet+ (HDMI-CEC)
) and see if
Anynet+ (HDMI-CEC)
has been set to
On
.
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
The TV audio is not being
played through the
receiver.
played through the
receiver.
Connect an optical cable to the TV and the receiver.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that supports
ARC.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that supports
ARC.