Elac FS 127 31181 Leaflet
Product codes
31181
2
•
The FS 127 provides one bass port on the rear and one down-firing bass port. Inserting the ELAC bass control plug into
the rear bass port will improve the sound when it comes to critical room conditions. This way, the upper bass area will be
reduced, while the deep bass area will be increased. This results in deep, dry bass sound. In case of critical room
conditions, the bass port on the rear may be closed by using the two-piece bass control plug.
the rear bass port will improve the sound when it comes to critical room conditions. This way, the upper bass area will be
reduced, while the deep bass area will be increased. This results in deep, dry bass sound. In case of critical room
conditions, the bass port on the rear may be closed by using the two-piece bass control plug.
• The FS 127 is a 2 1/2-way floor
standing speaker. The two bass
woofers work in tandem, however the
second bass driver becomes de-
coupled above 550Hz when it then
operates as a midrange unit.
standing speaker. The two bass
woofers work in tandem, however the
second bass driver becomes de-
coupled above 550Hz when it then
operates as a midrange unit.
• The utilization of two bass drivers has resulted in a high efficiency system, thus
enabling the smaller amplifiers to be used. Built in overload protection is a feature of
the FS127.
enabling the smaller amplifiers to be used. Built in overload protection is a feature of
the FS127.
Finishes: silver, titan, cherry, black
Specifications
ELAC FS 127
Crossover Frequency
550/2500 Hz
Dimensions H x W x D
950 x 235 x 330 mm
Nominal / Peak Power Handling
80 W / 120 W
Weight
16 kg
Frequency Range
35-25000 Hz
Type
2 1/2-way, bass reflex
Sensitivity
89 dB/2.8V/m
Woofer
2 x 140 mm AS cone,
magn. shielded
magn. shielded
Nominal Impedance
4 Ohm
Tweeter
1 x HT 25 KST V, magn. shielded
Minimum Impedance
3,6 Ohm / 200 Hz
Recom. Amplifier Power
at Nominal Impedance
at Nominal Impedance
30-180 W/channel