Samsung UN32EH5000F User Manual

 

y

For better picture and audio quality, connect to a digital device using an HDMI cable. 

 

y

The picture may not display normally (if at all) or the audio may not work if an external 

device that uses an older version of HDMI mode is connected to the TV. If such a problem 

occurs, ask the manufacturer of the external device about the HDMI version and, if out of 

date, request an upgrade. 

 

y

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a 

connection error may occur. 

 

y

PC(D-Sub) and PC/DVI AUDIO IN input are not supported. 

 

y

For HDMI/DVI cable connection, you must use the 

HDMI IN 1(DVI)

 jack. 

 

y

Connecting through the HDMI cable may not be supported depending on the PC. 

 

y

If an HDMI to DVI cable is connected to the 

HDMI IN 1(DVI)

 port, the audio does not work.

 

y

EX-LINK: Connector for service only.

 

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Figures and illustrations in this User Manual are provided for reference 

only and may differ from actual product appearance. Product design and 

specifications may be changed without notice.

 

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to 
height) are primarily designed to view wide screen format full-motion video. The 
images displayed on them should primarily be in the wide screen 16:9 ratio format, 
or expanded to fill the screen if your model offers this feature and the images are 
constantly moving. Displaying stationary graphics and images on screen, such as the 
dark sidebars on non- expanded standard format television video and programming, 
should be limited to no more than 5% of the total television viewing per week. 
Additionally, viewing other stationary images and text such as stock market reports, 
video game displays, station logos, web sites or computer graphics and patterns, 
should be limited as described above for all televisions. Displaying stationary images 
that exceed the above guidelines can cause uneven aging of LED Displays that leave 
subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary 
the programming and images, and primarily display full screen moving images, not 
stationary patterns or dark bars. On LED models that offer picture sizing features, 
use these controls to view different formats as a full screen picture. Be careful in the 
selection and duration of television formats you use for viewing. Uneven LED aging as 
a result of format selection and use, as well as burned-in images, are not covered by 
your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original 
Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the 
requirements, conditions, exclusions and limitations contained herein, SAMSUNG 
will additionally provide Warranty Repair Service in the United States on SAMSUNG 
products purchased in Canada, and in Canada on SAMSUNG products purchased 
in the United States, for the warranty period originally specified, and to the Original 
Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized 
Service Center. Along with this Statement, the Original Limited Warranty Statement 
and a dated Bill of Sale as Proof of Purchase must be presented to the Service 
Center. Transportation to and from the Service Center is the responsibility of the 
purchaser. Conditions covered are limited only to manufacturing defects in material or 
workmanship, and only those encountered in normal use of the product. Excluded, but 
not limited to, are any originally specified provisions for, in-home or on-site services, 
minimum or maximum repair times, exchanges or replacements, accessories, options, 
upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
–– In Canada : 1-800-SAMSUNG

Avoid displaying still images (such as jpeg picture files) or still image elements (such 
as TV channel logos, panorama or 4:3 image format, stock or news bars at screen 
bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of 
LED screen, which will affect image quality. To reduce risk of this effect, please follow 
below recommendations:
•  Avoid displaying the same TV channel for long periods.
•  Always try to display any image on full screen, use TV set picture format menu for 

best possible match.

•  Reduce brightness and contrast values to minimum required to achieve desired 

picture quality, exceeded values may speed up the burnout process.

•  Frequently use all TV features designed to reduce image retention and screen 

burnout, refer to proper user manual section for details.

Keep the required distances between the product and other objects (e.g. walls) to 
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in 
the internal temperature of the product.

 

✎

When using a stand or wall-mount, use parts provided by Samsung 
Electronics only.

 

x

If you use parts provided by another manufacturer, it may result in a 
problem with the product or an injury due to the product falling.

 

✎

The appearance may differ depending on the product.

 

✎

Be careful when you contact the TV because some parts can be somewhat 
hot.

Installation with a stand.

Installation with a wall-mount.

4inches

4inches

4inches

4inches

4inches

4inches

4inches

❑

Add, delete or set Favorite channels and use the program guide for 

digital broadcasts. Select a channel in the All Channels, Added 

Channels, Favorite or Programmed screen by pressing the 

▲ 

/ 

▼ buttons, and pressing the 

ENTER

E button. Then you can 

watch the selected channel.

Added Channels

6  

    Air

6-1  

♥ TV #6 

8  

    Air

9  

    Air

9-1 

♥ TV #9

10 

    Air

10-1 

♥ TV #10

11-1 

♥ TV #11

 

Air  

'

 Zoom  

'

 Select  T Tools  ► Next Program

 

■

 All Channels:  Shows all currently available channels.

 

■

 Added Channels: Shows all added channels.

 

■

*

 Favorite: Shows all favorite channels.

 

■

 Programmed:  Shows all currently reserved programs.

 

✎

Using the remote control buttons with the Channel List

 

x

Green (Zoom): Enlarges or shrinks a channel number.

 

x

Yellow (Select): Selects multiple channel lists. Select desired 

channels and press the Yellow button to set all the selected 

channels at the same time. The c mark appears to the left of 

the selected channels.

 

x

T (Tools): Displays the Channel List option menu. (The 

Options menus may differ depending on the situation.)

Channel Status Display icons

Icons

Operations

c

A channel selected.

*

A channel set as a Favorite.

)

A reserved program.

(

A program currently being broadcast.  

❑

Antenna (Air / Cable) 

t

Before your television can begin memorizing the available channels, 

you must specify the type of signal source that is connected to the 

TV (i.e. an Air or a Cable system).

Auto Program 

 

✎

When selecting the Cable TV system: Selects the cable 

system. STD, HRC and IRC identify various types of cable 

TV systems. Contact your local cable company to identify the 

type of cable system that exists in your particular area. At this 

point, the signal source has been selected.

 

✎

After all the available channels are stored, it starts to 

remove scrambled channels. The Auto program menu then 

reappears.

 

✎

Press the 

ENTER

E button to stop the channel store during 

Auto Program.

How to Stop Auto Programming

1.  Press the 

ENTER

E button.

2.  A message will ask Stop Auto Program? Select Yes by 

pressing the 

◄ or ► button.

3.  Press the 

ENTER

E button.

❑

This function filters out scrambled channels after Auto Program is 

completed. This process may take up to 20~30 minutes.

 

✎

Press the 

ENTER

E button to stop the Clear Scrambled 

Channel.

 

✎

This function is only available in Cable mode. 

Channel List Option Menu 

t

Set each channel using the Channel List menu options. Option 

menu items may differ depending on the channel status.

 

■

Add / Delete: Delete or add a channel to display the channels 

you want.

 

✎

All deleted channels will be shown on the All Channels 

menu.

 

✎

A gray-colored channel indicates the channel has been 

deleted. 

 

✎

The Add menu only appears for deleted channels.

 

✎

Delete a channel from the Added Channels or Favorite 

menu in the same manner.

 

■

t: Set channels 

you watch frequently as Favorites.

 

■

Timer Viewing: You can set a desired channel to be displayed 

automatically at the set time; even when you are watching 

another channel. Set the current time first to use this function.

 

✎

Only memorized channels can be reserved.

 

✎

Reserved programs will be displayed in the Programmed 

menu.

 

✎

When a digital channel is selected, press the 

► (Next 

Program) button to view the digital program. If you select 

the 

ENTER

E(Schedule) button on the next program, you 

can set Timer Viewing directly.

 

■

Channel Name Edit (analog channels only): Assign your own 

channel name.

 

■

Select All: Select all the channels in the channel list.

 

■

Deselect All: Deselect all the selected channels. 

 

✎

You can only select Deselect All when one or more 

channels are selected.

 

■

Auto Program: Scans for a channel automatically and stores in 

the TV

 Programmed 

(in Channel List)
You can view, modify or delete a show you have reserved to watch. 

 

■

Change Info: Change a show you have reserved to watch.

 

■

Cancel Schedules: Cancel a show you have reserved to watch.

 

■

Information: Display a show you have reserved to watch. (You 

can also change the reservation Information.)

 

■

Select All / Deselect All: You can select or deselect all channels 

in the channel list. 

Mode 

t

 

■

Standard: Selects the normal sound mode.

 

■

Music: Emphasizes music over voices.

 

■

Movie: Provides the best sound for movies.

 

■

Clear Voice: Emphasizes voices over other sounds.

 

■

Amplify: Increase the intensity of high-frequency sounds to allow a 

better listening experience for the hearing impaired.

(standard sound mode only)

 

■

Balance L/R: Adjusts the balance between the right and left 

speaker.

 

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): 

Adjusts the level of specific bandwidth frequencies.

 

■

Reset: Resets the equalizer to its default settings.

(standard sound mode only)
SRS TruSurround HD is a patented SRS technology that solves the 

problem of playing 5.1 multichannel content over two speakers. 

TruSurround delivers a compelling, virtual surround sound experience 

through any two-speaker playback system, including internal 

television speakers. It is fully compatible with all multichannel formats.

Preferred Language  

(digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of 

many audio tracks (for example, simultaneous translations of the 

program into foreign languages).

 

✎

You can only select a language from among the ones being 

broadcasted.

(analog channels only)

 

■

Mono: Choose for channels that are broadcasting in mono or if 

you are having difficulty receiving a stereo signal.

 

■

Stereo: Choose for channels that are broadcasting in stereo.

 

■

SAP: Choose to listen to the Separate Audio Program, which is 

usually a foreign-language translation.

 

✎

Depending on the program being broadcast, you can listen to 

Mono, Stereo or SAP. 

Because each broadcasting station has its own signal conditions, 

the volume may fluctuate each time channel is changed. This feature 

lets you automatically adjust the volume of the desired channel by 

lowering the sound output when the modulation signal is high or by 

raising the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed 

digital audio signal when you connect the digital audio jack on the 

back of the TV to a digital audio in jack on a receiver or home theater.

 

■

Audio Format: You can select the Digital Audio output (SPDIF) 

format. The available Digital Audio output (SPDIF) format may differ 

depending on the input source.

 

✎

By connecting the TV to a receiver or home theater with Dolby 

Digital and 5.1ch speakers and selecting Dolby Digital, you 

can maximize your interactive 3D sound experience.

 

■

Audio Delay: Lets you correct timing mismatches between the 

audio track and the video when you are watching the TV and 

listening to digital audio output from the TV through an external 

device such as an AV receiver. When you select Audio Delay, a 

slider appears. Use the left and right arrow buttons to adjust the 

slider. Press 

ENTER

E when done (0ms ~ 250ms).

Speaker Select

 

■

Speaker Select (External Speaker / TV Speaker): If you are 

listening to the sound track of a broadcast or movie through an 

external receiver, you may hear a sound echo caused by the 

difference in decoding speed between the TV’s speakers and the 

speakers attached to your audio receiver. If this occurs, set the TV 

to External Speaker.

 

✎

When you set Speaker Select to External Speaker, the 

TV’s speakers are turned off. You will hear sound through the 

external speakers only. When you set Speaker Select to TV 

Speaker both the TV’s speakers and the external speakers 

are on. You will hear sound through both.

 

✎

When Speaker Select is set to External Speaker, the 

VOLUME

 and 

MUTE

 buttons will not operate and the sound 

settings will be limited.

 

✎

If there is no video signal, both the TV’s speakers and the 

external speakers will be mute.

 

■

Reset All: Resets all sound settings to the factory defaults.

❑

 

✎

The current time will appear every time you press the 

INFO

 

button.

 

■

Clock: Setting the clock is for using various timer features of the 

TV.

 

✎

If you disconnect the power cord, you have to set the clock 

again.

Clock Mode: Set the current time manually or automatically.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.

 

✎

Available only when Clock Mode is set to Manual.

Time Zone: Select your time zone.
DST (Daylight Saving Time): Switches the DST (Daylight Saving 

Time) function on or off.

 

✎

DST and Time Zone function is only available when the 

Clock Mode is set to Auto.

 

■

Sleep Timer 

t

Automatically shuts off the TV after a preset period of time. (30, 
60, 90, 120, 150 and 180 minutes).

 

✎

To cancel the Sleep Timer, select Off.

Three different on / off timer settings can be made. You must set the 

clock first.

 

■

On Time / Off Time: Set the hour, minute, am/pm and Activate / 

Inactivate. (To activate the timer with the setting you have chosen, 

set to Activate.)

 

■

Volume: Set the desired volume level.

LED TV

user manual

Accessories

•  Remote Control (AA59-00600A) & 

Batteries (AAA x 2)

•  Warranty Card / Safety Guide

•  Owner’s Instructions
•  Power Cord
•  Cable manager

Input Cables (Sold Separately)

•  RS232 (AA39-00311A)
•  Audio
•  HDMI
•  HDMI-DVI

•  Component
•  Composite (AV)
•  Coaxial (RF)

 

✎

Check the cable before plug-in

Cable

Ports

HDMI

USB

Optical

Do not plug cable upside down.
Be sure to check before plug-in.

TV Controller (Panel Key)

Power on

Turns the TV on by pressing the controller in standby mode.

Adjusting the volume

Adjusts the volume by moving the controller from side to 

side when the power is on.

Selecting a channel

Selects a channel by moving the controller up and down 

when the power is on.

Using the function menu

Press the controller when the power is on, then the function 

menu screen appears. If you press it again, the function 

menu screen disappears.

Selecting the Media Play

Selects the MEDIA.P by moving the controller in the 
function menu screen. The Media Play main screen 
appears.

Selecting the MENU (m)

Selects the MENU(m) by moving the controller in the 

function menu screen. The OSD(On Screen Display) of your 

TV’s feature appears.

Selecting the Source 
List (s)

Selects the Source List(s) by moving the controller in the 

function menu screen. The Source List screen appears.

Power Off (P)

Selects the Power Off (P) to turn the TV off by moving the 

controller in the function menu screen.

 

✎

Exits the menu when pressing the controller more than 1 second.

 

✎

When selecting the function by moving the controller to the up/down/left/
right directions, be sure not to press the controller. If you press it first, you 
cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen 

prompts will assist in configuring basic settings. Press the 

POWER

 

button. Plug & Play is available only when the Input source is set to 

TV.

 

✎

Connecting the power cord and antenna. (refer to 

‘Connections’) 

Selecting a language

Select Language of the OSD.

Language

 

 

 U Move 

E Enter

Plug & Play



 







English
Español
Français

Select the desired OSD (On Screen 

Display) language.



Selecting a Home Use mode

Select ‘Home Use’ when installing this TV in your home.

 

 

 L Move 

E Enter

Plug & Play

Home Use

Store Demo



 





 



•  Select the Home Use mode. Store 

Demo mode is for retail environments.

•  When pressing TV controller, the 

function menu screen appears. Select 

the MENU(m) and press it more than 5 

seconds using the controller. The Store 

Demo mode is set. Cancel the Store 

Demo by selecting Source List(s) 

and pressing it more than 5 seconds.



Selecting an antenna

Select the Antenna source to memorize.

Air

Start

Cable

Start

Auto

Start

 

 U Move 

E Enter 

m Skip 

Plug & Play







 



In Cable mode, you can select the correct 

signal source among STD, HRC, and IRC 

by pressing the 

▲, ▼, ◄ or ► button.  



Setting the Clock Mode

Set the Clock Mode.

Clock Mode

: Auto

Plug & Play

 

 

 E 

Enter 

m Skip









Set the Clock Mode automatically or 

manually.
•  If you select the Auto, set the 

DST(Daylight Saving Time).

•  On the DST screen, press 

ENTER

E, 

then select whether to turn DST 

(Daylight Savings Time) on or off. Select 

the time zone where you live.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the 

ENTER

E button.

Source List

Use to select TV or an external input source such as a DVD player / 

Blu-ray player / cable box / STB satellite receiver.
1.  Press the 

SOURCE

 button.

2.  Select a desired external input source.

 

■

TV / AV / Component / HDMI1/DVI / HDMI2

 

✎

You can only choose external devices that are connected to the 

TV. In the Source List, connected inputs will be highlighted.

How to use Edit Name

Edit Name lets you associate a device name to an input source. To 

access Edit Name, press the 

TOOLS

 button in Source List. The 

following selections appear under Edit Name:

 

■

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV 

Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV 

/ Blu-ray / HD DVD / DMA: Name the device connected to the 

input jacks to make your input source selection easier.

 

✎

When connecting a PC to the 

HDMI IN 1(DVI)

 port with HDMI 

cable, you should set the TV to PC mode under Edit Name.

 

✎

When connecting a PC to the 

HDMI IN 1(DVI)

 port with HDMI 

to DVI cable, you should set the TV to DVI PC mode under Edit 

Name.

 

✎

When connecting an AV devices to the 

HDMI IN 1(DVI)

 port 

with HDMI to DVI cable, you should set the TV to DVI 

mode 

under Edit Name.

Information

You can see detailed information about the connected external 

device.

R-AUDIO-L

W

R

B

R

R

W

R

B

R

G

R G

W

Y

R

R

W

R

Y

R

W

R-AUDIO-L

R-AUDIO-L

PR

PB

Y

DVD / Home Theater

VCR

Blu-ray player

Cable

or

Power Input

TV Rear Panel

TV Side Panel

VHF/UHF Antenna

Audio Device (1)

Using an Audio (Analog) Cable

Audio Device (2)

Using an Optical (Digital) Cable

AV Device (2)

Using an Audio/Video 

AV Device (3)

Using a Component Cable 
(up to 1080p)

Media Play

Using a USB Drive

PC

Using a HDMI (to DVI) Cable

PC

Blu-ray player / DVD / cable box / 
sat box

AV Device (1)

Using a HDMI Cable  (up to 1080p)

Digital Audio System

 

■

Contents: When the On Time is activated, you can turn on a 

specific channel or play back contents such as photo or audio 

files.
-   TV/USB: Select TV or USB. (Make sure that an USB device is 

connected to your TV.)

- Antenna: Displays the current antenna source.
- Channel: Select the desired channel.
-   Music/Photo: Select the folder containing MP3/JPEG files on 

the USB device. 

 

✎

The maximum displayed number of files, including sub 

folders, in one folder of USB storage device is 2000.

 

✎

The media may not be playing smoothly when using the 

device lower than USB 2.0.

 

■

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, 

Sat~Sun or Manual to set at you convenience. If you select 

Manual, you can set up the day you want to activate the timer.

❑

The Program Rating Lock feature automatically locks out 

programs that are deemed inappropriate for children. The user 

must enter a PIN (personal identification number) before any of the 

Program Rating Lock restrictions are set up or changed.

 

✎

Program Rating Lock is not available in HDMI or 

Component mode.

 

✎

The default PIN number of a new TV set is “0-0-0-0”.

 

■

Program Rating Lock: You can block rated TV Programs.

 

■

TV Parental Guidelines: You can block TV programs 

depending on their rating. This function allows you to control 

what your children are watching.

 

■

MPAA Rating: You can block movies depending on their MPAA 

rating. The Motion Picture Association of America(MPAA) has 

implemented a rating system that provides parents or guardians 

with advanced information on which films are appropriate for 

children.

 

■

Canadian English: You can block TV programs depending on 

their Anglophone Canadian.

 

■

Canadian French: You can block TV programs depending on 

their French Canadian rating.

 

■

Downloadable U.S. Rating: Parental restriction information can 

be used while watching DTV channels.

 

■

Change PIN: The Change PIN screen will appear. Choose any 

4 digits for your PIN and enter it in Enter New PIN. Re-enter 

the same 4 digits in Confirm New PIN. When the Change 

PIN screen disappears, press the 

OK

 button. The TV has 

memorized your new PIN.

 

✎

If you forget the PIN, press the remote-control buttons in 

the following sequence, which resets the pin to “0-0-0-0” : 

POWER

 (off) 

→ 

MUTE

 

→ 8 → 2 → 4 → 

POWER

 (on)

Set the menu language.

 

✎

Choose between English, Español and Français.

When connecting to a game console such as PlayStation™ or 

Xbox™, you can enjoy a more realistic gaming experience by 

selecting the game menu.

 

✎

Precautions and limitations for game mode

 

x

To disconnect the game console and connect another external 

device, set Game Mode to Off in the setup menu.

 

x

If you display the TV menu in Game Mode, the screen shakes 

slightly.

 

✎

Game Mode is not available when the input source is set 

to TV. 

 

✎

After connecting the game console, set Game Mode to On. 

Unfortunately, you may notice reduced picture quality.

(On-Screen Text Messages)

 

■

Caption: You can switch the caption function on or off. If 

captions are not available, they will not be displayed on the 

screen.

 

✎

The Caption feature does not work in Component or 

HDMI mode.

 

■

Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The 

Analog Caption function operates in either analog TV channel 

mode or when a signal is supplied from an external device to 

the TV. (Depending on the broadcasting signal, the Analog 

Caption function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: 

(digital channels only) The Digital Captions function works with 

digital channels.

 

✎

Service1~6 may not be available in digital caption mode 

depending on the broadcast.

 

■

Digital Caption Options: (digital channels only)
Size: Options include Default, Small, Standard and Large. The 

default is Standard.
Font Style: Options include Default and Styles 0 to 7. The 

default is Style 0.
Foreground Color: Options include Default, White, Black, Red, 

Green, Blue, Yellow, Magenta and Cyan.  

You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red, 

Green, Blue, Yellow, Magenta and Cyan. You can change the 

background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options 

include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption 

background. Options include Default, Transparent, Translucent, 

Solid and Flashing.
Return to Default: This option sets each Size, Font Style, 

Foreground Color, Background Color, Foreground Opacity and 

Background Opacity to its default.

 

✎

Digital Caption Options are available only when Default 

and Service1 ~ Service6 can be selected in Caption 

Mode.

 

✎

The Foreground and Background cannot be set to have 

the same color.

Set so that a melody plays when the TV is turned on or off.

 

✎

The Melody does not play.

 

x

When no sound is output from the TV because the 

MUTE

 

button has been pressed.

 

x

When no sound is output from the TV because the volume has 

been reduced to minimum with the 

VOL –

 button.

 

x

When the TV is turned off by Sleep Timer function.

Auto Protection Time 

 

■

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 

hours): If the screen remains idle with a still image for a certain 

period of time defined by the user, the screen saver is activated 

to prevent the formation of ghost images on the screen.

© 2012 Samsung Electronics Co., Ltd. All rights reserved.

Press to select additional channels (digital) being 

broadcasted by the same station. For example, 

to select channel ‘54-3’, press ‘54’, then press 

‘-’ and ‘3’.

Returns to the previous channel. 

Press to directly access to channels.

Turns the TV on and off.

Displays and selects the available video 

sources. 

Use these buttons in a specific feature.

P.SIZE

: Lets you choose the picture size. 

MTS

:

 

Press to choose stereo, mono or Separate Audio 

Program (SAP broadcast). 

CC

: Controls the caption decoder. 

Cuts off the sound temporarily.

Automatically shuts off the TV at a preset 
time.

Displays the channel list on the screen. 

Displays information on the TV screen. 

Quickly select frequently used functions. 

Selects the on-screen menu items and changes the 

values seen on the menu.

Exit the menu.

Returns to the previous menu.

Turns the remote control light on or off. When 
on, the buttons become illuminated for a 
moment when pressed. (Using the remote 
control with this button set to On will reduce 
the battery usage time.)

Use these buttons according to the 

direction on screen.

Changes channels.

Displays the main on-screen menu.

Views the Media Play.

Adjusts the volume.

 

y

The side panel may differ depending on the model.

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, 

please contact the SAMSUNG customer care center. 

Country

CANADA

U.S.A

Address

Samsung Electronics 
Canada Inc., Customer 
Service 55 Standish Court 
Mississauga, Ontario L5R 
4B2 Canada

Samsung Electronics 
America, Inc. 85 
Challenger Road 
Ridgefield Park, NJ 07660

Customer Care 

Center 

1-800-SAMSUNG (726-7864)

Web Site

www.samsung.com/ca 
(English)
www.samsung.com/ca_fr 
(French)

www.samsung.com/us

- 2 -

- 1 -

- 6 -

- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

BN68-04499B

BN68-04499B-02

Display Modes (HDMI/DVI Input)

Optimal resolution
4000 series:1366 x 768@60Hz / 5000 series: 1920 x 1080@60Hz 

Mode

Resolution

Horizontal 

Frequency (KHz)

Vertical 

Frequency (Hz)

Pixel Clock 
Frequency 

(MHz)

Sync 

Polarity 

(H / V)

1366 x 768

1920 x 1080

IBM

 640 x 350

31.469 

70.086 

25.175 

+/-

c

c

 720 x 400

31.469 

70.087 

28.322 

-/+

c

c

MAC

 640 x 480

35.000 

66.667 

30.240 

-/-

c

c

832 x 624

49.726 

74.551 

57.284 

-/-

c

c

1152 x 870

68.681 

75.062 

100.000 

-/-

c

VESA DMT

 640 x 480

31.469 

59.940 

25.175 

-/-

c

c

 640 x 480

37.861 

72.809 

31.500 

-/-

c

c

 640 x 480

37.500 

75.000 

31.500 

-/-

c

c

 800 x 600

37.879 

60.317 

40.000 

+/+

c

c

800 x 600

48.077 

72.188 

50.000 

+/+

c

c

800 x 600

46.875 

75.000 

49.500 

+/+

c

c

1024 x 768

48.363 

60.004 

65.000 

-/-

c

c

1024 x 768

56.476 

70.069 

75.000 

-/-

c

c

1024 x 768

60.023 

75.029 

78.750 

+/+

c

c

1152 x 864

67.500 

75.000 

108.000 

+/+

c

 1280 x 720 

45.000 

60.000 

74.250 

+/+

c

c

1280 x 800

49.702 

59.810 

83.500 

-/+ 

c

1280 x 1024

63.981 

60.020 

108.000 

+/+

c

1280 x 1024

79.976 

75.025 

135.000 

+/+

c

1366 x 768

47.712 

59.790 

85.500 

+/+

c

c

1440 x 900

55.935 

59.887 

106.500 

-/+ 

c

1600 x 900RB

60.000 

60.000 

108.000 

+/+

c

1680 x 1050 

65.290 

59.954 

146.250 

-/+  

c

1920 x 1080

67.500 

60.000 

148.500 

+/+

c

Installing batteries (Battery size: AAA)

 

✎

NOTE

 

x

Use the remote control within 23 feet from TV.

 

x

Bright light may affect the performance of the remote control. 

Avoid use when nearby fluorescent lights or neon signs.

 

x

The Color and shape may vary depending on the model.

Channel Mode

Change the channel mode directly between Added Channels and 

Favorite Channels.

 

✎

The Favorite Channels is enabled only when you set Add to 

Favorite.

Fine Tune 

(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as 

this is done automatically during the search and store operation. If the 

signal is weak or distorted, fine tune the channel manually.

 

✎

Fine tuned channels that have been saved are marked with an 

asterisk “*” on the right-hand side of the channel number in the 

channel banner.

 

✎

To reset the fine-tuning, select Reset.

t

Select your preferred picture type.

 

✎

When connecting a PC, you can only select Entertain and 

Standard.

 

■

Dynamic: Suitable for a bright room.

 

■

Standard: Suitable for a normal environment.

 

■

Movie: Suitable for watching movies in a dark room.

 

■

Entertain: Suitable for watching movies and games.

 

✎

Only available when connecting a PC.

Backlight / Contrast / Brightness / Sharpness / 
Color / Tint (G/R) 

Your television has several setting options for picture quality control.

 

✎

When connecting a PC, you can only make changes to 

Backlight, Contrast, Brightness and Sharpness

(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a more 

precise picture.

 

✎

When connecting a PC, you can only make changes to Gamma 

and White Balance.

 

■

Color Space (Auto / Native): Adjusts the range of colors available 

to create the image.

 

■

White Balance: Adjusts the color temperature for a more natural 

picture.
R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, 

blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue) 

brightness.
Reset: Resets the White Balance to it’s default settings.

 

■

Gamma: Adjusts the primary color intensity.

 

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the 

screen contrast. 

 

■

Black Tone (Off / Dark / Darker / Darkest): Select the black level 

to adjust the screen depth.

 

■

Flesh Tone: Emphasize pink “flesh tone”.

 

■

Motion Lighting (Off / On): Reduce power consumption by 

brightness control adapted motion.

 

✎

Available in Standard mode only.

 

✎

When connecting a PC, you can only make changes to the 

Color Tone, Size and HDMI Black Level.

 

■

Color Tone (Cool / Standard / Warm1 / Warm2)

 

✎

Warm1 or Warm2 will be deactivated when the picture mode 

is Dynamic.

 

■

Size: Your cable box/satellite receiver may have its own set of 

screen sizes as well. However, we highly recommend you use 16:9 

mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire 

screen.
4:3: Sets the picture to basic (4:3) mode.

 

✎

Do not watch in 4:3 format for a long time. Traces of borders 

displayed on the left, right and center of the screen may 

cause image retention (screen burn) which are not covered 

by the warranty.

Screen Fit (DTV): Displays the full image without any cut-off when 

HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) 

signals are inputted.

 

✎

HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p 

(1280x720)

 

✎

Settings can be adjusted and stored for each external device 

you have connected to an input on the TV.

 

✎

Picture Sizes available by Input Source:

Input Source

Picture Size

ATV, AV, Component (480i, 480p)

16:9, Zoom1, Zoom2, 4:3

DTV(1080i, 1080p), Component 

(1080i, 1080p), HDMI (720p, 1080i, 

1080p)

16:9, Wide Fit, 4:3, Screen Fit

 

■

Digital Noise Filter (Off / Low / Medium / High / Auto): If the 

broadcast signal received by your TV is weak, you can activate the 

Digital Noise Filter feature to reduce any static and ghosting that 

may appear on the screen.

 

✎

When the signal is weak, try other options until the best 

picture is displayed.

 

■

HDMI Black Level (Normal / Low): Selects the black level on the 

screen to adjust the screen depth.

 

✎

Available only in HDMI mode (RGB signals).

 

■

Film Mode (Off / Auto): Sets the TV to automatically sense and 

process film signals from all sources and adjusts the picture for 

optimum quality.

 

✎

Available in ATV, DTV(interlace), AV, COMPONENT (480i / 

1080i) and HDMI (480i / 1080i).

 

■

LED Motion Plus (Off / On): Removes drag from fast scenes with 

a lot of movement to provide a clear picture.

Resets your current picture mode to its default settings.

 

■

Reset Picture Mode: Returns all picture values in the currently 

selected mode to the default settings.

TV Controller

Function menu

Remote control sensor

MEDIA.P

m R

P

Return

[UE4000-5000-ZC]BN68-04499B-02ENG.indd   1

2013-10-22   오후 2:01:41