Samsung 400TS-3 User Manual
General Control Panel Menu
FIG. (6)
1. Mapping
The control panel can be used to make adjustments or configurations using a USB connection and
supports multiple touchscreens connected to the same PC. The panel provides basic information for
the touchscreen and allows for calibration. If several touchscreens are mounted on the PC and the status
is set to “multi-screens display,” then more than one touchscreen will appear in the Touchscreen List.
Use [Mapping] to choose a monitor for each touchscreen before calibrating; otherwise, the
touchscreens will not work. Follow these steps to configure the settings for multiple touchscreens:
Click ”Mapping” to make a button-mark appear in the center of each monitor in order of priority. Click
the center of the button-mark to acknowledge the mounted touchscreen; If you find no information
about the touchscreen, press “Esc” or wait for 30 seconds, and then the program will skip the current
touchscreen setting and continue automatically to the next one.
supports multiple touchscreens connected to the same PC. The panel provides basic information for
the touchscreen and allows for calibration. If several touchscreens are mounted on the PC and the status
is set to “multi-screens display,” then more than one touchscreen will appear in the Touchscreen List.
Use [Mapping] to choose a monitor for each touchscreen before calibrating; otherwise, the
touchscreens will not work. Follow these steps to configure the settings for multiple touchscreens:
Click ”Mapping” to make a button-mark appear in the center of each monitor in order of priority. Click
the center of the button-mark to acknowledge the mounted touchscreen; If you find no information
about the touchscreen, press “Esc” or wait for 30 seconds, and then the program will skip the current
touchscreen setting and continue automatically to the next one.
2. Calibrate
This function is applicable to single view mode and dual view mode. Click the [Calibrate] button on
the screen. Tap all the target circles and click OK to save the calibration.
the screen. Tap all the target circles and click OK to save the calibration.
Calibration process: Select a touch screen from the information list. In the calibration window dis-
played, click the "Calibrate" button. Click the centers of the 4 calibration points in sequence to complete
the calibration. Click the "Esc" button to close the calibration window. After calibration, the "Recali-
brate," "OK," and "Cancel" buttons will appear. Click "Recalibrate" to perform the calibration process
again. To save the changes and close the window, click "OK." To close the window without saving
the changes, click "Cancel."
played, click the "Calibrate" button. Click the centers of the 4 calibration points in sequence to complete
the calibration. Click the "Esc" button to close the calibration window. After calibration, the "Recali-
brate," "OK," and "Cancel" buttons will appear. Click "Recalibrate" to perform the calibration process
again. To save the changes and close the window, click "OK." To close the window without saving
the changes, click "Cancel."
Settings
The Settings window is split into 8 areas (FIG. 7):
1.
Modes
2.
Options
3.
Calibrate Settings
4.
Smoothness Settings
Using the Software