Samsung UA65KS7000W e-Manual

Page of 104
77
Before Using the Recording and Timeshift Functions
Read these instructions before using 
Recording
 and 
Timeshift
.
 
"
This function is only available on certain models in specific geographical areas.
Before using the recording and schedule recording functions
 
To set up a Schedule Recording, you must first set the TV's clock. Set the 
Clock
 (      
Settings
   
System
   
Time
   
Clock
).
 
You can set up a maximum total of 30 
Schedule Viewing
 and 
Schedule Recording
 entries.
 
Recordings are DRM-protected and therefore cannot be played back on a computer or on a different 
TV. In addition, these files cannot be played back on your TV if its video circuit has been replaced.
 
A USB hard drive with a speed of 5,400 rpm or above is recommended. However, RAID-type USB 
hard drives are not supported.
 
USB memory sticks are not supported.
 
The total recording capacity may differ with the amount of available hard drive space and the 
recording quality level.
 
Schedule Recording
 requires at least 100MB of free space on the USB storage device. Recording will 
stop if the available storage space falls below 50MB while recording is in progress.
 
If the available storage space falls below 500MB while both the Schedule Recording and Timeshift 
functions are in progress, only the recording will stop.
 
The maximum recording time is 720 minutes.
 
Videos are played according to the TV settings.
 
If the input signal is changed while recording is in progress, the screen will go blank until the 
change is made. In this case, recording will resume, but   will not be available.
 
When using the Record or Schedule Recording function, the actual recording may start a second or 
two later than the specified time.
 
If the Schedule Recording function is operating while a recording is being made on an HDMI-CEC 
external device, the priority is given to the Schedule Recording.
 
Connecting a recording device to the TV automatically deletes abnormally saved recording files.
 
If the 
Off Timer
 or 
Auto Power Off
 has been set, the TV will override these settings, continue to 
record, and turn off after the recording has ended.
Precautions and Notes
You can get instructions and information that you must read after installation.