Samsung Electric Dryers User Manual

3

Continuous Run Mode:
1.  Press Signal + Dry Level for 3 sec during Power On State (Normal User Mode) .
2.  Once in Continuous Run Mode, 7-Segment will toggle display “total cycle” and the remaining

time.

3.  The previous cycle will restart during Continuous Run Mode until continuous run mode is

disabled.

4.  During Continuous Run Mode, press Signal + Dryness Level for 3 seconds to return to normal

user mode. 7-segment will no long display “total cycle ” and only display the remaining time.

While in Service Mode pressing the Signal key will put the dryer into the cycle count mode

Cycle number executed will display.

To enter Special Test Mode press While in Service Mode pressing the Signal key for 3 seconds 

or until the control beep. 

Dryer must be on before Service Mode can be entered.

Press Signal and Temp Keys for 3 seconds, or until 3 beeps are heard.

The machine will now be in Service Mode.

Upon entry into Service Mode, the Sensor Bar Touch Data will be shown (Default Special Test

Mode).

To enter Special Test Mode press Signal and Temp Keys for 3 seconds for 3 seconds or until 

the control beep.

With Power On pressing Signal and Temp Keys for 3 seconds

This action will put the dryer into sensor bar touch data mode

Dryer will display Sensor Bar data. This mode is default mode of entering service mode

How to Enter:
-   With Power On pressing Signal and Temp Keys for 3 seconds

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before 
servicing, unless testing requires power.

Technical_information-02365G-00_EN.indd   3

2011-09-21   �� 3:07:08