Zebra 01407-000 User Manual
Operation
Hex-dump Mode
Hex-dump Mode
24
P1003643-001
TTP 1020™/TTP 1030™ Technical Manual
03/03/2009
Hex-dump Mode
When faultfinding the system, a printout of all data transferred to the printer in invaluable.
(Added in firmware version 2.10)
(Added in firmware version 2.10)
1.
Remove power from the printer..
2.
Lift the print head by pushing the paper release lever towards the paper entry.
3.
Hold the feed-forward button depressed while applying power to the printer. Keep the
button depressed for at least 5 seconds.
button depressed for at least 5 seconds.
4.
Release the form-feed button.
The printer is now in a HEX-dump mode and all on-line communication is printed in both
HEX format and ASCII character format. The printed lines are 8 characters long, each
representation printed using character set 0.
HEX format and ASCII character format. The printed lines are 8 characters long, each
representation printed using character set 0.
If the last line to be printed in HEX mode contains fewer than 8 characters, the line is not
automatically printed. A short press on the feed-forward button will print the last, incomplete
line.
automatically printed. A short press on the feed-forward button will print the last, incomplete
line.
Exit from HEX dump mode by removing power from the printer.