Zebra 01407-000 User Manual
Interfaces
USB (TTP 1030)
USB (TTP 1030)
74
P1003643-001
TTP 1020™/TTP 1030™ Technical Manual
03/03/2009
USB (TTP 1030)
The USB (Universal Serial Bus) is an interface designed to handle peripherals daisy chained to
a single connector. The transfer speed is up to 12 Mbits/s, which is quite adequate for the
TTP 1030. Use this interface in operating systems with USB support, for instance Windows
2000. USB devices are Plug and Play compatible and hot swappable, which means that they
can be connected and disconnected without turning off the power, or rebooting the computer.
a single connector. The transfer speed is up to 12 Mbits/s, which is quite adequate for the
TTP 1030. Use this interface in operating systems with USB support, for instance Windows
2000. USB devices are Plug and Play compatible and hot swappable, which means that they
can be connected and disconnected without turning off the power, or rebooting the computer.
Table 12 • USB Connector (J13) Pin Assignment
Note •
The TTP 1030 follows the "Universal Serial Bus Device Class Definition for Printing
Devices". Both the unidirectional and the bi-directional interface models are supported.
Windows 98 supports the unidirectional model, while Windows 2000 & XP support full bi-
directional communication with the printer.
Windows 98 supports the unidirectional model, while Windows 2000 & XP support full bi-
directional communication with the printer.
Contact Number
Signal Name
Comment
1
VCC
Cable power
2
– Data
3
+ Data
4
Ground
Cable ground