Zebra 01407-000 User Manual
Specifications
Ordering Number List
Ordering Number List
84
P1003643-001
TTP 1020™/TTP 1030™ Technical Manual
03/03/2009
Preprinting
Ink used for preprinting on the thermal side shall be non-abrasive.
The ink shall not smear while wound up on the supply roll or during the printing process.
Perforation
Ordering Number List
Printer Assembly
• Basic printer TTP 1020 (Parallel)01379-000
• Basic printer TTP 1030 (Serial + USB)01539-000
• Evaluation kit TTP 1020 containing one basic printer and one each of the options marked
² below 01374-000
• Evaluation kit TTP 1030 containing one basic printer and one each of the options marked
³ below 01374-001
Options
General
Due to the heat developed during printing, the preprint shall meet the
requirements applicable for preprinting on paper intended for laser
printing. OCR-blind ink shall be used.
requirements applicable for preprinting on paper intended for laser
printing. OCR-blind ink shall be used.
Print side
One side or both sides. No preprint other than black-marks in the
black mark zone on the back of the paper.
black mark zone on the back of the paper.
Tear-off perforation
Punching shall be done from outer side (thermal coating side) with a
sharp perforation tool.
sharp perforation tool.
Paper-near-end sensor with 300 mm cable
01296-000
Output nozzle ² ³ (see
.)
01365-000
IEEE-1284 cable straight 1.8 m ²
01366-000
IEEE-1284 cable 90° 1.8 m
01366-090
USB cable 1.8 m ³
01542-000
Serial null modem cable 1.8 m ³
01659-000
Paper roll
∅150 mm, 65g/m², length ≈ 250m ² ³
01468-058
Printer driver CD, Windows and Linux ² ³
01376-000