Samsung WD16J7200KW/YL User Manual

English  47

Tr

ouble

shoo

ting

Information codes

Check the diagnostic codes below and follow the suggestions. If a certain symptom continues, 
contact a local Samsung service center.

Code

Action

1C

Check the water level sensor.
•  Power off and power the machine on after 2-3 minutes, and then try 

again.

•  Depending on the model, the drain system drains water automatically. 

The POWER and START/PAUSE buttons may be disabled during this 
process.

TC2

Check the temperature sensor on the dry air.
•  Power off and power the machine on after 2-3 minutes, and then try 

again.

DC

The door is open.
•  Close the door and press START/PAUSE to resume operation.

DC1

Check the door switch.
•  Power off and power the machine on after 2-3 minutes, and then try 

again.

LC

Check for water leaks.
•  Power the machine off and check the drain system for any leak. Once 

the leak is solved, power the machine on after 2-3 minutes.

•  Depending on the model, the drain system drains water automatically. 

The POWER and START/PAUS buttons may be disabled during this 
process.

FC

Check the fan motor.
•  Power off and power the machine on after 2-3 minutes, and then try 

again.

4C

Check the water supply line.
•  Check for the connection of the water line (including water taps).
•  Power off and power the machine on after 2-3 minutes, and then try 

again.

•  Depending on the model, the drain system drains water automatically. 

The POWER and START/PAUS buttons may be disabled during this 
process.

WD7000JK-03464P-01_EN (Saudi)_160407.indd   47

2016-04-07     5:28:29