Samsung DM82E-BR Quick Setup Guide
Specifications
Model Name
DM82E-BR
Panel
Size
207.2 cm
Display area
1805.76 mm (H) x 1015.74 mm (V)
Dimensions (W x H x D)
1911.8 x 1121.7 x 178.0 mm (140 mm Without Handle)
Weight (without stand)
78.2 kg
Audio Output
10 W + 10 W
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
considerations
Operating
Temperature : 0 ˚C – 40 ˚C (32 ˚F – 104 ˚F), With PIM : 10 ˚C – 40 ˚C (50 ˚F – 104 ˚F)
Humidity :10% – 80%, non-condensing
Humidity :10% – 80%, non-condensing
Storage
Temperature : -20 ˚C – 45 ˚C (-4 ˚F – 113 ˚F)
Humidity : 5% – 95%, non-condensing
Humidity : 5% – 95%, non-condensing
- This device is a Class A digital apparatus.
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers -
18002668282, 180030008282.
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers -
18002668282, 180030008282.
Tray
Installing the Tray
Ⓡ
Ⓡ
Issues
Solutions
The screen keeps
switching on and off.
switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
product and PC, and ensure the connection is
secure.
No Signal
is displayed
on the screen.
Check that the product is connected correctly
with a cable.
Check that the device connected to the
product is powered on.
with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode
is displayed.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the
screen look distorted.
screen look distorted.
Check the cable connection to the product.
The screen is not clear.
The screen is blurry.
The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
unstable and shaky.
unstable and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
There are shadows or
ghost images left on the
screen.
ghost images left on the
screen.
Issues
Solutions
The screen is too bright.
The screen is too dark.
The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is
inconsistent.
inconsistent.
Go to Picture and adjust the Colour Space
settings.
settings.
White does not really
look white.
look white.
Go to Picture and adjust the White Balance
settings.
settings.
There is no sound.
Check the connection of the audio cable or
adjust the volume.
adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to
the maximum level, adjust the volume on
your PC sound card or software programme.
the maximum level, adjust the volume on
your PC sound card or software programme.
The remote control does
not work.
not work.
Make sure that the batteries are correctly in
place (+/-).
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
switched on in the vicinity.
Troubleshooting Guide
1
Turns the Touch on or off.
2
View menus of the display device.
3
Turns the product on or off.
4
Connect to a USB memory device.
5
Connects to a source device using an HDMI cable.
6
Connects the Touch to a PC.
7
Connect the OCM cable to the tray and the TRAY IN port on the product.
8
Connect the IR Touch Control cable to the tray.
When attaching the Tray, use the screws that came with the package.
Do not fasten the screws with excessive force. The product may get damaged.
Make sure to connect the USB touch cable to the USB (5V 1A) / TOUCH IN port on the product.
To use the touch function with a computer or a Network box (sold separately) connected to the product, use a USB cable to connect the TOUCH OUT port on the
product to the port on the computer or Network box.
Do not fasten the screws with excessive force. The product may get damaged.
Make sure to connect the USB touch cable to the USB (5V 1A) / TOUCH IN port on the product.
To use the touch function with a computer or a Network box (sold separately) connected to the product, use a USB cable to connect the TOUCH OUT port on the
product to the port on the computer or Network box.
[DM82E-BR-QSG-INDIA]BN68-07270J-00.indd 2
2015-06-17 �� 1:02:23