Samsung 120 W 2.0Ch Mini Micro Component J430D User Manual

English

Basic Functions

Setting the Clock

For each step, you have a few seconds to set the

required options. If you exceed this time, you must

start again.

1. Switch the system on by pressing the

POWER ( ) button.

2. Press the TIMER CLOCK button and then

press the v button.

Result: "CLOCK" is displayed.

3. Press the v button.

Result: The hour flashes.

Decrease the hours:

Increase the hours:

4. When the correct hour is displayed, press the

v button.

Result: The minutes flashes.

Decrease the minutes:

Increase the minutes:

5. When the correct minute is displayed, press

the v button.

Result: " TIME" appears in the display.

The current time is now set.

| NOTE |

You can display the time, even when you are using

another function, by pressing the TIMER CLOCK

button once.

Timer Function

The timer enables you to switch the system on or

off at specific times automatically.

Before setting the timer, check that the current time is

correct.

For each step, you have a few seconds to set the

required options. If you exceed this time, you must

start again.

If you no longer want the system to switch on or off

automatically, you must cancel the timer by pressing

the TIMER ON/OFF button.

Example: You wish to wake up to music every
morning.

1. Switch the system on by pressing the

POWER ( ) button.

2. Press the TIMER CLOCK button and then

press the ▲ or ▼ buttons until TIME is
displayed.

3. Press the v button.

Result: ON is displayed for a few seconds, you

can set the timer switch-on time.

4. Set the timer switch-on time.

a Press the $ or % button.

b Press the v button.

Result: The minutes flash.
c Press the $ or % button.

d Press the v button.

Result: OFF is displayed for a few

seconds, you can now set the
timer switch-off time.

5. Set the timer switch-off time.

a Press the $ or % button.

b Press the v button.

Result: The minutes flash.

c Press the $ or % button.

d Press the v button.

Result: VOL XX is displayed, where XX

corresponds to the volume already
set.

6. Press $ or % button to adjust the volume level

and press the v button.

Result: The source to be selected is displayed.

7. Press the $ or % button to select the desired

source to be played when the system switches on.

FM (radio) : a Press the v

button.

b Select a preset station by

press the $ or % button.

DVD/CD (compact disc): Load one audio CD.

USB : Connect the USB device.

8. Press the v button.

Result: CHKREC (Do you want to record?) is

displayed.

9. Press the v button.

Result: REC N is displayed, you can press the $

or % button to select the REC Y or REC N, and

then press v button.

1). If you select the REC N, it will cancel tuner

timing recording even if you have already set
the tuner timing recording.

MM-J430D-SG-ENG-0708.indd 22

2016/2/4 15:20:03