Samsung UD46C User Manual

111

MENU 

m : T

   

   

   ENTER 

--

Multi Control

ID Setup

ID Input

MDC Connection

DisplayPort Daisy Chain

00

RS232C MDC

Clone

 

-

The displayed image may differ depending on the model.

 

•

Assign an ID to a set. (Range: 0~99)
Press   or   to select a number, and press 

.

 

•

Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.

 

•

Select a method to connect to MDC to receive the MDC signal.

 

-

: Communicate with MDC via the RS232C-stereo cable.

 

-

: Communicate with MDC via the RJ45 cable.

 

•

To display theDP IN video input through the DP OUT output port, select a device connection method from Single 
Stream Transport (SST) and Multi Stream Transport (MST).

: In this Single Stream Transport (SST) output mode, the same screen output is displayed on two display devices 

connected.

 

― If 

 is selected, the 

 recognizes the two displays as a single monitor.

 

―

 mode is enabled if the input source is a digital input other than 

, such as 

, 

, 

.

: In this Multi Stream Transport (MST) mode, a different screen output is displayed on two display devices 

connected.

 

― If 

 is selected, the 

 recognizes the two displays as separate monitors.

 

― The mode functions only on a PC that supports DisplayPort 1.2 MST.

 

― For Full HD resolution (1920x1080) displays, a maximum of four displays can be connected.