Samsung GIGA SOUND MX-JS8000 User Manual

02
Getting Started

Cooling fan

•  The fan operates while the unit is 

powered on. 

If you set the unit to the minimum 

volume, the fan won't operate.  

Secure a minimum 6 inches (15 cm) of 

clear space on from all sides of the fan 

when installing the product.

POWER

•  Insert only the provided power cable.

2.2 CH Speaker Terminals
1.  To achieve the correct sound quality, 

when you connect the speakers, match 

the color of the speaker plugs to the 

color of the speaker jacks. See below.

•  LEFT channel (marked  , White/Purple).

•  RIGHT channel (marked  , Red/Purple).

•  Don't force the Purple SUBWOOFER 

connector into the White or Red speaker 

jack.

LED Terminals for Speaker Beat 

Waving, which do not distinguish 

between left and right channel.

ONLY FOR SERVICE

•  This jack is for testing only. Please do 

not use.

AUX IN 2 Terminals
1.  Use an Audio Cable (not supplied) to 

connect AUX IN 2 on the product to 

Audio Out on an external analog output 

device.

•  Be sure to match connector colors.

•  If the external analog output device has 

only one Audio Out jack, connect either 

left or right.

•  Press the TUNER/AUX button to select 

AUX 2.

•  If the product is in AUX mode for more 

than eight hours and no buttons on the 

front panel or remote are pushed, the 

system will turn off.

FM Antenna Terminals
1.  Connect the FM antenna to the FM 

antenna connector terminal.

2.  Slowly move the antenna wire until you find 

a location where reception is good, then 

fasten it to a wall or other rigid surface.

3.  If reception is poor, you may need to 

install an outdoor antenna. To do so, 

connect an outdoor FM antenna to the 

FM socket on the rear of the system 

using a 75Ω coaxial cable (not supplied).

  English