Samsung SNC-B2331P User Manual

English _27

●

NETWORK CONNECTION AND SETUP

Checking if the IP router is connected to the xDSL/Cable modem properly

Select <Status> from the Settings menu of the IP Router

If it is properly connected, <IP Address>, <Subnet Mask> and <Gateway>
provided by your ISP are displayed. Please remember these values because they
are required so that an external remote computer of the IP router connects to the
camera. However, note that certain ISPs change the settings of <IP Address>,
<Subnet Mask> and <Gateway> on a regular basis

If the IP router is not properly connected, press the [Connect] button to try to recon-
nect or check if the settings of the IP router are correct.

CONNECTING THE CAMERA TO AN IP ROUTER WITH
LOCAL AREA NETWORKING

This is for a large network environment such as corporate office, building, public office and factory.

Configuring the network settings of the local PC connected to an
IP router

Configuring the network settings of the local PC connected to an IP router, follow the
instructions below.

Select : <Network Neighborhood>

<Properties> <Local Area Connection>

<Properties> <General> <Internet Protocol (TCP/IP)> <Properties>

<Obtain an IP address automatically> or <Use the following IP address>.
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the IP router is 192.168.1.1

IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1

ex2) If the address (LAN IP) of the IP router is 192.168.0.1

IP address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1

⦐䀠Gwj

ḩ㡔ὤG㞬⺴Gwj

ⵝ䞈ⷱ

pwGḩ㡔ὤ

㞬⺴G㠄ᷝGwj

kkuzG㉐ⶸ

OkGjSGrvylhP

SNC-B2331

Local PC

IP Router

External Remote PC

DDNS Server

(Data Center, KOREA)

Local PC

Firewall

INTERNET

Switch

HUB