Samsung RM40D Quick Setup Guide

To use it as a TV+signage, follow Step1 through Step6.

H

48”~55”

32”~40”

48”~55”

32”~40”

Follow steps 1 (drill test holes) → 2 (drill the screw holes) and fix H (Plastic Anchor) on the wall.

* Screws are not needed.

* Drill holes in the wall and remove the guide sheet.

D

I

H

Fasten D (Bracket Distance) to H (Plastic Anchor) on the wall, using I (Screw).

F

Attach F (Bracket Wall), as shown in the diagram.

E

D

Insert the tab of D (Bracket Distance) into the hole of E (Cover Distance).

G

Fix the assembled bracket using G (Screw).

K

N

J

N

J

N

K

N

Top: Fix J (Holder TV Top) using N (Screw).
Bottom: Fix K (Holder Support) using N (Screw).

M

K

L

K

Attach L (Holder TV Bottom A) and M (Holder TV Bottom B) to  

K (Holder Support).

Install the product on the wall bracket.  
A click sound means it is attached correctly.

M

Extend M (Holder TV Bottom B) and connect the cables.

Move the product side to side slightly to level it.

BN68-06719R-01

RM40D RM48D

The terms HDMI and HDMI High-Definition Multimedia 
Interface, and the HDMI Logo are trademarks or registered 
trademarks of HDMI Licensing LLC in the United States 
and other countries.

You can use the product as a TV, and as signage (advertisement media) using the MagicInfo Express 2 
programme on your compatible computer.

 - The warranty way be void in the event of a breakdown due to exceeding the maximum 

recommended hours of use per day of 16 hours.

To use it as a TV only, follow Step1 through Step4.

Quick setup guide

Warranty card
(Not available in some locations)

Regulatory guide

User manual / MagicInfo Express 2 (USB or DVD)

Mini Wall-mount Kit (optional)

Stand base

Stand neck

Remote Control

Batteries  
(Not available in some locations)

Power cord

The following images are for reference only. Real-life situations may differ from what is shown in the images.
Components may vary depending on the country and model.  

Store the empty box in a dry area so that it can be used when moving the product in the future.

*  Make sure no component is missing in the package. Contact the vendor where you purchased the product or Samsung if any components specified as  

included are missing.

* The Mini Wall-mount Kit may not be supported, depending on the model.

Components

A

VESA STANDARD

(2.09”)

53mm     

200mm (7.88”)

400mm (15.75”)

200mm (7.88”)

400mm (15.75”)

48”~55”

32”~40”

32”~40”

48”~55”

B

C

 X 8

Remove the paper tape at the centre of A (Drill guide sheet).

A

Attach B (Leveler) to the appropriate spot at the centre of A (Drill guide sheet).

B

A

Place the product on a soft cloth to protect the panel.

C

B

32”~40”

48”~55”

Fix A (Drill guide sheet) to the wall using C (Sticker). Make sure that B (Leveler) is level.

Components

D

 X 2

E

 X 2

F

G

X 2

H

 X 4

I

 X 4

Make sure the wall where the provided mini wall mount kit will be installed is flat, smooth and perfectly vertical. 
Dry Wall, Gypsum-board, SheetRock: Please use a qualified installer to install the Wall Mount Bracket.

* MDF = Medium Density Fiberboard 
* PW = Plywood

Min. 50mm

Min. 10mm
MDF, PW

MDF, PW, etc.

With reinforcement

Min. 
50mm

Min. 10mm
MDF, PW

MDF, PW

Art Wall

Min. 30mm

MDF, PW

(Exc. drywall 
thickness)

Min. 
25mm

Min. 10mm
MDF, PW

Concrete

Art Wall

Min. 30mm

Mixed Concrete 
Wall (Exc. drywall 
thickness)

Min. 
25mm

0~24mm

MDF, PW, 
Concrete

Without
reinforcement

Art Wall

Cannot install on drywall

Drywall

3mm(1/8")

65mm(2.5")

15mm

•  Check the type of wall, location of the studs and then insert the screws.
•  Minimum Stud Size: 51 x 102 mm (2 x 4 in), Predrill 3mm holes before inserting the screws.
•  The holes must be drilled along the centre axis of the studs.
•  Inserting the screws without predrilling can split the studs. 

Manufacturer will not be responsible for any issue arising from your failure to follow these installation  
instructions or damage to walls or studs, as a result of installation.

Components

J

 X 2

K

 X 2

L

 

M

 

N

 X 4 

            

To install the product using the wall-mount kit, 
refer to "Wall Mount Installation".

Included components

To install the product using the stand, 
refer to "Stand Installation" on the next page.

Included components

c

Contact the dealer where you purchased the product or Samsung if any components are missing.
The appearance of the components may differ from the images shown.

A

VESA STANDARD

(2.09”)

53mm     

200mm (7.88”)

400mm (15.75”)

200mm (7.88”)

400mm (15.75”)

48”~55”

32”~40”

32”~40”

48”~55”

B

C

 X 8

Drill guide sheet

Leveler

Sticker

D

 X2

E

 X2

F

G

 X 2  

    (M5X15)

H

 X 4

Plastic Anchor

I

 X 4

Bracket Distance

Cover Distance

Bracket Wall

Screw

Screw

Mini Wall-mount Kit

J

 X2

K

 X2

L

M

N

 X 4

    (M8X40)

Holder TV Top

Holder Support

Holder TV Bottom A

Holder TV Bottom B

Screw

9mm (11/32")

65mm (2.6")

2mm (3/32")

5mm (0.2")

c

Place A (Drill guide sheet) on the back of the product to confirm the locations of VESA holes.

* To install the product in portrait orientation, lay it down vertically to test the requirements.

32”

~40”

32”

~40

”

The product can be installed in either landscape or portrait orientation. Select an orientation.

*  If installing the product in portrait orientation, TV broadcasts and video playback may be limited. 

You can create content using the MagicInfo Express 2 programme on your compatible computer.

To install the product in portrait orientation, refer to the diagram found under "Installing in Portrait Orientation" below.

Right

left low part

To use in portrait orientation, make sure that the connectors are on the side that faces down when installing.

Front

Back

Wall

<Installation is complete>

[RMD-QSG]BN68-06719R-01.indd   1

2015-11-09   �� 10:52:24