Samsung RF26NBSH User Manual

Page of 32
GETTING READY TO INSTAll ThE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope 
you enjoy the state-of-art features and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
•   A Location with easy access to the water 
supply.
•   A Location without direct exposure to 
sunlight.
•  A Location with level (or nearly level) flooring.
•   A Location with enough space for the 
Refrigerator doors to open easily.
•   Allow sufficient space for air circulation of the 
internal cooling system.  
 If the Refrigerator does not have enough 
space, the internal cooling system may not 
work properly.
50mm
5mm
5mm
mm
0mm
50mm
•   Allow clearance to the right, left, back and top when installing. This will 
help reduce power consumption and keep your energy bills lower.
•   Do not install the Refrigerator where the temperature will go below 10 
ºC(50 ºF).
REMOVING ThE REFRIGERATOR DOORS
If the Refrigerator is too large to pass through your doorway easily, you can remove the 
refrigerator doors.
REMOVING ThE REFRIGERATOR DOORS
Philips head 
screwdriver
Wrench(10mm)
Flat head 
screwdriver
Pliers
DISASSEMblE ThE REFRIGERATOR DOORS
1.  With the door opened, remove the Top Table 
cap (
1
) with a Flat head screwdriver, and close 
the door. Remove the 3 screws holding down 
the Top Table and remove the Top Table(
2
).
2
 
1
8_Setting Up
When installing, servicing or cleaning behind the refrigerator, be sure to pull 
the unit straight out and push back in straight after finishing.
When moving your refrigerator
To prevent floor damage be sure the front levelling legs are in ther up position 
(above the floor). Refer to ‘Levelling the refrigerator’ in the manual (at page 11).
To protect the finish of the flooring, place the protection sheet such as packing 
carton under the refrigerator.
CAUTION
DA99-01623A-05.indd   8
2010.10.15   8:32:13 AM