Samsung SNC-B5368P User Manual
English _55
●
SETUP SCREEN
EVENT SETUP
To set the event transfer function
You can set the FTP/email server (SMTP) to transfer the alarm images present in the
camera, in case an alarm event occurs.
camera, in case an alarm event occurs.
Select <Event> - <Transfer setup>.
The Image transfer setup window appears.
The Image transfer setup window appears.
For more information on commercial
SMTP services, contact the SMTP service
provider.
SMTP services, contact the SMTP service
provider.
To test the FTP transfer
Click [Test].
This will test if the image is transferred to the
specified FTP server properly.
When the test on the FTP server connection
and transfer is done, a message of
<( Verified )> will be displayed.
You will see an error message if the test
fails. If this is the case, check the FTP server
status or the settings again.
This will test if the image is transferred to the
specified FTP server properly.
When the test on the FTP server connection
and transfer is done, a message of
<( Verified )> will be displayed.
You will see an error message if the test
fails. If this is the case, check the FTP server
status or the settings again.
FTP transfer : With this, you can transfer alarm images to the FTP server. If the initial FTP
server setting and the connection status are not verifi ed, the <( Not verifi ed )> message
appears.
server setting and the connection status are not verifi ed, the <( Not verifi ed )> message
appears.
Use passive mode : Select this option when the passive mode connection is
inevitable due to the fi rewall or FTP server setting.
inevitable due to the fi rewall or FTP server setting.
FTP server address : Enter the IP address of a FTP server to which an alarm image
will be transferred.
will be transferred.
M
y
-
-