Samsung HT-TX500 User Manual

Page of 38
GB
CONNECTIONS
19
Connecting the Optional Wireless Receiving Amplifier
18
Connecting the Speakers
(Con’t)
POWER
ON
OFF
AUDIO IN
CROSS OVER
Front Speaker (R)
Rear Speaker (L)
Rear of
Subwoofer
Center Speaker
Front Speaker (L)
Rear Speaker (R)
WIRELESS RECEIVER MODULE
1
Connect the front and center speakers to the Subwoofer, referring to
pages 16~18. 
2
With the DVD Player turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the side of the main unit.
Hold the TX card so that the slanted side faces upward and insert the 
card into the port. 
The TX card enables communication between the subwoofer and the wireless receiver.
3
Connect the left and right rear speakers to the wireless receiving 
module.  
4
Plug the power cord of the wireless receiving module in the wall outlet
and switch the power switch <ON>.  
• Do not insert a card other than the TX card dedicated for the product. 
The product might be damaged or the card may not be removed easily.
• Do not insert the TX card upside down or in the reverse direction.
• Insert the TX card when the DVD Player is turned off. 
Inserting the card when it is turned on may cause a problem.
• If the TX Card is inserted, sound is not output from the Rear Speaker
connectors on the subwoofer.
Slanted side face up
TX card
Connecting the Main Unit and Subwoofer
POWER
ON
OFF
AUDIO IN
CROSS OVER
AUDIO IN
Rear of Subwoofer
Rear of Main unit
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and 
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)  
Subwoofer: With the built-in, dedicated 165W amplifier, the subwoofer generates rich bass sounds.
Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the Crossover control
for the best bass response  in your room.
Subwoofer Functions
POWER
ON
OFF
AUDIO IN
CROSS OVER
4
2
3
1
1 Power button
2 External Audio Input Connector 
3 Crossover Controller
4 Speaker Output Terminals 
Use the system cable to connect the AUDIO OUT port of the main unit to the AUDIO IN port 
of the subwoofer.
HT-TX500_GB-(1~45)-1009  10/19/07 3:10 PM  Page 18