Becker indianapolis pro User Guide
80
User settings
User settings
Opening / quitting User
Settings menu
Settings menu
After calling up the user settings, the fol-
lowing basic settings can be made on
two levels according to your personal
preferences.
First level:
lowing basic settings can be made on
two levels according to your personal
preferences.
First level:
•
Gal
- Speed-dependent volume
control (GAL)
•
Tel
- Telephone response
•
Lum
- Display brightness
•
Led
- Adjusting LED
•
M/S
- Adjusting reception
optimisation
•
Nav
- Adjusting navigation
announcements
Second level:
•
Aux
- Adjusting the AUX input
•
Cmp
- Adjustment of the Compass
Display
•
BeV
- Adjusting signal tone volume
X
The user menu is requested by press-
ing the
ing the
button for longer than 2
seconds.
X
To access the second level of the User
menu, press multifunction button
menu, press multifunction button
.
X
Press the
button again to quit
the user menu.
Setting the GAL (Gal)
The GAL is a car radio control circuit,
which automatically adjusts the car ra-
dio volume according to vehicle speed.
This results in compensation of the driv-
ing noise produced at higher speeds.
which automatically adjusts the car ra-
dio volume according to vehicle speed.
This results in compensation of the driv-
ing noise produced at higher speeds.
X
Calling up the user menu.
X
Press the
multifunction button.
X
With the right rotary control
, select
either
0
or
+15
.
The GAL setting can be used to specify
the starting point for the volume increase
according to vehicle speed.
The setting is stored automatically.
The settings are:
the starting point for the volume increase
according to vehicle speed.
The setting is stored automatically.
The settings are:
•
0
- No volume increase
•
+1
- Volume increase is initiated at
low speed
•
+15
- Volume increase is initiated at
higher speed