Acer extensa 670 Service Manual
Service Guide
6-7
6.5.4 Removing/Replacing the Keyboard Assembly
The procedure for removing and replacing the keyboard assembly is as follows:
1.
Turn off the computer; disconnect the AC power adapter (if it is attached), and remove the
battery pack as described in Paragraph 6.5.1.
battery pack as described in Paragraph 6.5.1.
2.
Press the Cover Release Latch and open the notebook to a full 180 degree position as shown
in Figure 6-6.
in Figure 6-6.
3.
Slide each of the two display hinge covers out and pull upward to remove from the notebook.
Figure 6-6
Removing the Display Hinge Covers
4.
Pull up on the keyboard as shown in Figure 6-7 and disconnect the Keyboard cable connectors
J0102 and J0103.
J0102 and J0103.
5.
If you intend to remove further, then disconnect the Touchpad cable connector J0104.
Figure 6-7
Removing/Replacing the Keyboard Assembly
6.
Install the replacement keyboard assembly by reversing Steps 1 through 5.